Product Description
Lexus GS 2013-2020 Pillar Post Trim, 4-Piece Polished 304 Stainless Set (PP13108)
PP13108 is listed for the Lexus GS 4-door sedan across eight model years, 2013 to 2020. It's a set of four pillar post covers, polished 26 gauge 304 stainless steel, made in the USA. The row simply says "Lexus GS", so it doesn't single out one engine or trim. The title matches.
Four now, or six?
The sheet's other option is PP13109, six pieces for the same GS. Neither listing has notes or names the pillars it covers. The way to choose is visual: set the two sets' photos next to each other, note any shapes that appear in one but not the other, and find where they'd sit on your car. If the four covers here take care of the pillars you want brightened, there's no need for more. If the six-piece photos show a spot you'd like done as well, consider that set. The catalog doesn't tell us whether the sets overlap, so order just one.
Confirming the year
Eight years on one row is a long run. Look up your model year in your records, and confirm it's the sedan. If either falls outside the listing, phone Quality Automotive Trims at 877-752-3811 with PP13108 before ordering.
Attachment
The covers mount with 3M automotive-grade acrylic foam tape and sit directly over the existing surface. You won't drill, and you won't take anything off the car. Lexus GS prep is described on the Installation tab.
Preparing
Give the pillars a wash with a pH-neutral car soap, rinse and towel dry. Then wipe them down with isopropyl alcohol on a lint-free cloth and let it evaporate fully. Wax, sealants and ceramic coatings stop tape from bonding properly, so remove them where the tape will sit. Fix any chips or flaking first.
Placing the covers
Hold a cover to its pillar with its liner on, compare it with the photos, and look along both long edges. They should follow the pillar closely. If a cover seems wrong, try it on another pillar. When it fits, mark both ends with painter's tape and note the location on the liner. Repeat for all four before you peel.
Then peel one liner, set the cover between its marks, and press it down firmly from end to end, finishing with your thumb along both edges. Do the rest the same way and compare the four from a few steps back. The Installation tab gives the temperature range and the cure time before the first wash.
Light, tools, patience
Work in a garage or shade, since glare hides small misalignments. Have a bucket, soap, towels, isopropyl alcohol, a lint-free cloth, painter's tape, a pen and the photos ready. If a cover won't sit right, keep the liner on, photograph it in place and call us.
Upkeep
Mild soap and a soft cloth. Abrasive pads will scratch the polish.
The Fitment and Specs tabs list the data. The Lexus rows as cataloged appear on the Fitment tab.
PP13108 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP13108 |
| UPC | 691821492381 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2020 Lexus GS |
Fitment: PP13108
| Vehicle | Years | Body style |
|---|---|---|
| Lexus GS | 2013-2020 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2020 Lexus GS
- PP13109: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP13108 Pillar Post Trim
What does PP13108 fit?
The 2013-2020 Lexus GS 4-door sedan.
Is there a six-piece set?
Yes, PP13109 for the same GS.
Which pillars are covered?
The listing doesn't say. Compare the photos or call 877-752-3811.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
