Product Description
Honda Fit 2015-2019 Pillar Post Trim, Four Pieces in Polished Stainless (PP15220)
If your Honda Fit is a 2015 through 2019 model, PP15220 is the smaller of the two pillar post sets QAA catalogs for it. Four covers, 304 stainless at 26 gauge, polished, made in the USA. The catalog row says Honda Fit 2015-2019 with the tags 4-door and Hatchback, and the title says the same.
Think of the decision as four covers versus six. PP15221 is the six-piece version for the same row. Beyond that count, the catalog is silent on both: there's no note on either one, no list of which pillars they cover, and no word about a triangle or mirror piece. The way through is to treat the photo galleries as the spec sheet. Note how many different outlines each set shows and which ones appear in only one of the two. Match that against the posts on your Fit that you'd like in stainless, and you have your answer. Get one set, not both; look at each set's photos side by side.
How do they stay on? With 3M automotive-grade acrylic foam tape, pressed directly onto the existing surface. There's no hardware, so the doors keep every factory piece they came with and nobody reaches for a drill. On the question of how long the tape lasts, this listing says nothing, and we'll leave it there.
The polished face isn't a plating or a wrap; it's the 304 stainless itself, so it won't flake, and the 26 gauge thickness lets each cover lie close on its pillar.
Clean surfaces make the difference between a cover that stays put and one that lifts at a corner. So: soap and water first, a good rinse, a dry towel. Then rubbing alcohol on a lint-free rag, wiped over each pillar and left to dry on its own. If the paint has a wax or a ceramic coating, take it off in the spots where the covers will go.
Fitting four covers takes one patient pass and one committed pass. In the patient pass, hold each cover on its pillar with the liner still on, shuffle it until the edges look even all the way along, mark the ends with painter's tape, and write the door on the liner. In the committed pass, peel each liner in turn, set the cover between its marks, and press it down hard along its length and both edges, one cover after another. Temperature limits and the cure time are listed on the Installation tab.
Pick a dry day without strong sun on the car, and keep a step stool nearby for the upper ends. The whole job is short.
Check your records for the model year first; this row only runs 2015 through 2019, and anything else should start with a call to 877-752-3811 and the number PP15220. When the covers arrive, compare them with the gallery before you start. A cover that won't sit flush should keep its liner while you test it on another pillar. Wash it like the rest of the paint, with ordinary car soap.
PP15220 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP15220 |
| UPC | 691821534913 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2019 Honda Fit |
Fitment: PP15220
| Vehicle | Years | Body style |
|---|---|---|
| Honda Fit | 2015-2019 | 4-door, Hatchback |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2019 Honda Fit
- PP15221: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP15220 Pillar Post Trim
What does PP15220 fit?
The Honda Fit 2015-2019, tagged 4-door and Hatchback.
How is it different from PP15221?
PP15221 has six pieces. Neither names its pillars, so compare photos and choose one.
Does it include a triangle piece?
The listing has no notes and doesn't name one.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
