Product Description
Honda Crosstour 2010-2015 Pillar Post Trim in Polished Stainless, 4 Pieces (PP10283)
This sheet lists two parts for the Honda Crosstour, and both are pillar post sets. PP10283 is the four-piece one. Its fitment row reads Honda Crosstour, 2010 through 2015, 4-door, Crossover SUV, and the title gives the same years. The six-piece alternative, PP10284, carries identical tags.
Because the listing says nothing about which pillars these four pieces cover, the product photos do that job. Look at them next to PP10284's photos and you'll see what the larger set's two further pieces fit. Choose the one that matches the look you're after. If the photos leave you unsure, Quality Automotive Trims can talk it through at 877-752-3811; just mention PP10283. Anything about the Crosstour you'd like to ask? We're reachable on 877-752-3811. Crosstour prep is covered on the Installation tab. Be thorough with the cleaning along the pillar edges, where residue collects.
Each piece is cut from 26 gauge 304 stainless steel and polished, and the set is made in the USA. The pieces attach with 3M automotive-grade acrylic foam tape, installed directly over the existing surface. That means no drilling, no clips and nothing to unbolt. Phone 877-752-3811 about your Crosstour and quote PP10283.
Confirming fit takes only a moment. Check the Crosstour's year falls between 2010 and 2015. The row is tagged Crossover SUV with four doors. If anything about your vehicle doesn't line up with that row, call before ordering rather than after; it's quicker for everyone.
The quality of the result comes almost entirely from preparation. A pillar that looks clean can still carry a thin film from glass cleaner, wax or road grime, and any of those keeps the tape from gripping. Wash with soapy water, rinse, and dry. Wipe each pillar with rubbing alcohol on a clean cloth, then let it evaporate. Where the finish is chipped or lifting, repair it before trim goes on. If you know a ceramic coating or sealant was applied, remove it from the contact area following the product maker's directions.
For the install itself, start with the dry fit. Hold each of the four pieces to its pillar, liner still attached, and compare it with the photos until you're sure of the match. Write the location on each liner. Then peel the first liner, set the piece along the pillar's edges, and press firmly from one end to the other, finishing with a fingertip along each edge. Repeat for the rest. When all four are in place, walk around the vehicle and compare them. A mild, dry day within the temperature range in the Installation tab gives the tape a good start, and the tab also lists how long to wait before the first wash.
Polished stainless needs very little care. Wash it with mild soap and water and dry it with a soft cloth. Avoid steel wool, abrasive pads and gritty polish, and wipe away glass cleaner if it lands on the trim.
Questions about PP10283 or the six-piece set? Call 877-752-3811.
PP10283 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10283 |
| UPC | 691821454938 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Honda Crosstour |
Fitment: PP10283
| Vehicle | Years | Body style |
|---|---|---|
| Honda Crosstour | 2010-2015 | 4-door, Crossover SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2015 Honda Crosstour
- PP10284: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10283 Pillar Post Trim
What vehicle does PP10283 fit?
The 2010-2015 Honda Crosstour, 4-door Crossover SUV.
Is there a larger set?
Yes, PP10284 has six pieces with the same fitment.
How many pieces are in PP10283?
Four.
Will I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What material is it?
Polished 26 gauge 304 stainless steel, made in the USA.
