Product Description
PP10284: Honda Crosstour 2010-2015 Six-Piece Stainless Pillar Post Set
The basics
PP10284 is six pieces of pillar post trim in polished 26 gauge 304 stainless steel, made in the USA, for the Honda Crosstour 4-door Crossover SUV from 2010 through 2015. It mounts with 3M automotive-grade acrylic foam tape, installed directly over the existing surface. That's the whole record; there are no notes and no width listed.
How it compares
The only other part on this Crosstour sheet is PP10283, a four-piece pillar set with the same fitment tags. Neither listing names the pillars it covers. To see exactly what this set's two further pieces cover, the product photos for both listings show it better than words. Our advice: look at both, then stand next to your vehicle and decide how much of the window frame you'd like in stainless. If you'd like a second opinion, call Quality Automotive Trims at 877-752-3811 with PP10284.
Does it fit?
If your Crosstour is a 2010, 2011, 2012, 2013, 2014 or 2015 model, the row is tagged for it. The title agrees with the row. Your records both show the model year.
Is there drilling?
No. The tape goes directly over the existing surface, so nothing is drilled or removed.
A sensible order of work
- Open the product photos and keep them in view throughout.
- Lay the six pieces out on a towel, arranged front to back as the photos show.
- Hold each to its pillar with the liner on; label the liner once it matches.
- Wash the pillars with soapy water and dry them.
- Wipe with rubbing alcohol and let it evaporate fully.
- Peel, align with the pillar edges, and press firmly along the full length.
- Seat both edges with a fingertip.
- Fit three, check them, then do the rest and compare.
Why label the liners?
Once the liners come off, the pieces can't be test-fitted again without risking the tape. Labeling during the dry fit means every decision about position is made while mistakes are still free to fix. It also lets you stop halfway and pick up later without starting the sorting over.
What about the surface?
Tape sticks to the surface it touches, so that surface has to be clean and sound. Remove wax, sealant or coating from the contact area. Repair any chipped or peeling finish first. Small flaws next to bright trim tend to stand out more, not less.
When should I install?
Choose a dry day within the temperature range shown in the Installation tab, out of harsh direct sun if you can, since glare makes alignment harder to judge. Let the tape cure for the time the tab lists before the first wash.
How do I care for it?
Wash with mild soap and water and dry with a soft cloth. Avoid abrasive pads, steel wool and harsh polish. Wipe off glass cleaner overspray when you do the windows. Any questions: 877-752-3811. Quote PP10284 so we can open the row straight off and go through the photos of both sets with you.
PP10284 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10284 |
| UPC | 691821422074 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Honda Crosstour |
Fitment: PP10284
| Vehicle | Years | Body style |
|---|---|---|
| Honda Crosstour | 2010-2015 | 4-door, Crossover SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2015 Honda Crosstour
- PP10283: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10284 Pillar Post Trim
What does PP10284 fit?
The 2010-2015 Honda Crosstour, 4-door Crossover SUV.
How is it different from PP10283?
It has six pieces; PP10283 has four. Compare their photos to see the difference.
How many pieces?
Six.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's the finish?
Polished 304 stainless steel, 26 gauge, made in the USA.
