Product Description
PP10751: Mazda3 Sedan 2010-2013 Six-Piece Stainless Pillar Post Trim
This set is for the sedan. PP10751's fitment row reads Mazda Mazda3, 2010 through 2013, 4-door, Sedan, and it does not list the hatchback. That matters because the sheet shows a second six-piece set, PP10752, that's tagged for the 4-door hatchback only. The two share a piece count and years but not a body style, so order by body. If you have the hatchback, look at PP10752 instead. There's also a four-piece set, PP10750, tagged for both the sedan and hatchback.
How to be sure of your body style. Count the doors, and check your records if you're unsure. If you're unsure, call Quality Automotive Trims at 877-752-3811 with PP10751 and we'll help.
What the set is. Six pieces of polished 26 gauge 304 stainless steel, made in the USA, for the sedan's pillars. The listing doesn't say which pillars the six pieces cover; the product photos show them. No width or notes are listed.
How it mounts. 3M automotive-grade acrylic foam tape, installed directly over the existing surface. No drilling. Mazda3 prep is set out under Installation, with the temperature range to work in and the cure time before the first wash.
Four or six for a sedan? Sedan owners can choose between this six-piece set and the four-piece PP10750. Both sets' photos show what the further pieces cover. It's not stated whether the sets share pieces, so check the photos before ordering both. Choose one, or ask us. Clean along the window edges carefully, as that tab describes.
Getting the pillars ready. Wash with soapy water and dry. Wipe with rubbing alcohol on a clean cloth, letting it evaporate fully. Remove wax, sealant or coating from the contact area, and fix any peeling or chipped finish before trim goes over it.
Sorting and installing. Lay the six Mazda3 pieces front to back, checking each against the gallery. Hold each to its pillar with the liner on, confirm the fit, and label the liner. Then fit them one at a time: peel, align with the pillar's edges, press firmly from end to end, seat both edges with a fingertip. Check the first three from a few steps away before doing the rest, then compare. Install on a dry day within the Installation tab's temperature range, out of harsh sun if possible, and wait the listed cure time before washing.
If a piece doesn't match. Don't peel it. Try it on another pillar, check the photos again, and call us with a photo if it still seems wrong.
What you'll need. Soapy water, a few clean microfiber towels, rubbing alcohol, a roll of painter's tape, a marker for the liners and the product photos on a phone. Painter's tape is handy for marking each piece's ends during the dry fit, so you can return it to exactly the same spot once the liner is off.
Care. Wash with mild soap and water, dry with a soft cloth, and keep abrasive pads and steel wool away from the polish. The Specs tab repeats PP10751's details.
PP10751 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10751 |
| UPC | 691821577750 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2013 Mazda Mazda3 |
Fitment: PP10751
| Vehicle | Years | Body style |
|---|---|---|
| Mazda Mazda3 | 2010-2013 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2013 Mazda Mazda3
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10751 Pillar Post Trim
Does PP10751 fit the Mazda3 hatchback?
No, it's tagged 4-door sedan only. PP10752 is the six-piece hatchback set.
What years?
2010-2013.
How many pieces?
Six.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Is there a smaller set?
PP10750 has four pieces and is tagged for the sedan & hatchback.
