Product Description
Mazda3 2010-2013 Pillar Post Trim, 4 Stainless Pieces, Sedan or Hatchback (PP10750)
PP10750 is the one Mazda3 pillar set on this sheet that's tagged for both body styles. Its fitment row reads Mazda Mazda3, 2010 through 2013, 4-door, Sedan, Hatchback. The two six-piece sets listed alongside it are split by body: PP10751 is tagged for the 4-door sedan only, and PP10752 for the 4-door hatchback only. So if you own either body style, this four-piece set is tagged for your car, while the six-piece choice depends on which one you have.
What that means when you shop
Start with your body style. If you want the four-piece coverage, PP10750 is the answer whether you drive the sedan or the hatchback. If you want six pieces, make sure you pick the one that matches your body: PP10751 for the sedan, PP10752 for the hatchback. Which pillars the further pieces cover isn't explained, so compare the photos. Questions? Call Quality Automotive Trims at 877-752-3811 and mention PP10750 and your body style.
Specs
- Four pieces
- 304 stainless steel at 26 gauge, polished
- Made in America
- Sticks directly to the existing surface with 3M automotive-grade acrylic foam tape
No drilling is needed. Ring 877-752-3811 if you're unsure how either set fits your Mazda3. No width or notes are listed.
Confirm the year
Title and fitment row both read 2010-2013 for the Mazda3 sedan and hatchback, so match that range against your car before ordering.
Prep
Wash the pillars with soapy water, dry them, and wipe with rubbing alcohol until a clean cloth comes away clean. Let it evaporate. Remove any wax or sealant from the contact area, and repair chipped or lifting finish first; tape can only hold to a sound surface.
Install
Match each of the four pieces to its pillar using the photos, holding it in place with the liner on. Write the position on the liner. Then peel and place one at a time, aligning each piece with the pillar's edges and pressing firmly from end to end. Run a fingertip along both edges. When all four are on, compare them from a few steps back. A dry day within the Installation tab's temperature range is best, ideally out of direct sun, and the tab lists the cure time to wait before washing. Four covers come in the Mazda3 set, all polished stainless.
A note on mixing sets
Because the sets share the same car, it's natural to wonder whether you can combine them. Whether pieces overlap between the four- and six-piece sets isn't stated, so compare photos before buying both. Pick one, or call us first.
If a piece seems wrong
Leave its liner on. Hold it against a different pillar, since similar pieces swap easily, and check it against the photos once more. If it still doesn't fit, take a photo of it held in place and call us. Solving it before the tape touches the car is always easier.
Care
Mild soap and water and a soft cloth. Avoid abrasive pads and steel wool.
PP10750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10750 |
| UPC | 691821343171 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2013 Mazda Mazda3 |
Fitment: PP10750
| Vehicle | Years | Body style |
|---|---|---|
| Mazda Mazda3 | 2010-2013 | 4-door, Sedan, Hatchback |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2013 Mazda Mazda3
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10750 Pillar Post Trim
Does PP10750 fit the sedan and the hatchback?
Yes, its row lists the 2010-2013 Mazda3 4-door Sedan & Hatchback.
Which six-piece set do I need?
PP10751 is tagged sedan; PP10752 is tagged hatchback.
How many pieces in PP10750?
Four.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What material?
Polished 26 gauge 304 stainless steel, made in the USA.
