Product Description
Mazda5 2006-2010 Pillar Post Trim, 4 Polished Stainless Pieces (PP10755)
PP10755 is a four-piece pillar post trim set for the 2006-2010 Mazda Mazda5, tagged 4-door hatchback. Each piece is polished 26 gauge 304 stainless steel, made in the USA, and the set attaches with 3M automotive-grade acrylic foam tape directly over the existing surface. A six-piece version, PP10756, is listed on the same sheet with identical tags.
On an older vehicle, start with the surface
The newest Mazda5 this set is tagged for is a 2010, so any car it goes on has some years of sun and weather behind it. That's the most important thing to account for. Before you order, look closely at the pillars. Is the finish chalky or faded? Are there chips along the edges near the glass? Is anything peeling or lifting? Tape needs a clean, sound surface, and polished stainless next to a damaged finish draws the eye to the damage. If you find problems, repair them first. If the pillars are in good shape, a careful clean is all they need.
Fitment
Mazda Mazda5, 2006 through 2010, 4-door, hatchback. The title gives the same years. Check the Mazda5 is a 2006 to 2010, and call Quality Automotive Trims at 877-752-3811 with PP10755 if unsure. Mazda5 fit questions are welcome on that line. Deciding between the four and six pieces? We can compare them with you on 877-752-3811.
Four or six
Neither this set nor PP10756 names its pillars in the catalog, so the photos show what each covers. Compare them before choosing. Four pieces is the quicker install; the six-piece set has two more.
Mounting details
Because the tape installs directly over the existing surface, there's no drilling and nothing to remove. Give PP10755 when you phone about your Mazda5. No width or notes are listed.
Cleaning in stages
Wash each pillar with soapy water and rinse. Dry fully. Wipe with rubbing alcohol on a clean cloth and repeat until the cloth stays clean; older finishes can hold years of wax and cleaner residue. Let the alcohol evaporate before the next step.
Fitting the pieces
Using the photos, hold each piece to its pillar with the liner on and confirm the fit against the pillar's edges. Label each liner. Then peel and place one at a time, pressing firmly from one end to the other and finishing with a fingertip along both edges. Compare the covers once all four are on. Install on a dry day inside the temperature range from the Installation tab, and wait the listed cure time before washing.
Painter's tape marks
During the dry fit, put a small strip of painter's tape at each end of every piece. When the liner comes off, those marks show exactly where the piece belongs, so you place it once instead of sliding it around on sticky tape. Remove the marks after the piece is pressed home.
Care
Mild soap, water and a soft cloth. Skip abrasive pads and steel wool, and wipe off any glass cleaner that drifts onto the stainless.
PP10755 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10755 |
| UPC | 691821257652 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Mazda Mazda5 |
Fitment: PP10755
| Vehicle | Years | Body style |
|---|---|---|
| Mazda Mazda5 | 2006-2010 | 4-door, Hatchback |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Mazda Mazda5
- PP10756: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10755 Pillar Post Trim
What does PP10755 fit?
The 2006-2010 Mazda Mazda5, 4-door hatchback.
Is there a six-piece set?
Yes, PP10756 with the same fitment.
How many pieces in PP10755?
Four.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
My pillars are faded. Can I still install?
Repair chipped or peeling finish first; tape needs a clean, sound surface.
