Product Description
PP10756: Six-Piece Stainless Pillar Post Set for the 2006-2010 Mazda5
PP10756 gives the 2006-2010 Mazda Mazda5 4-door hatchback six pieces of polished stainless pillar post trim. It's the larger of two pillar sets on this sheet. PP10755, the four-piece set, shares its fitment tags. The pillars aren't named for either set, so compare the product photos to see what the two further pieces fit. Mazda5 prep is on the Installation tab.
The facts on file. Six pieces. 26 gauge 304 stainless steel with a polished finish. Made in the USA. 3M automotive-grade acrylic foam tape, installed directly over the existing surface. Fitment: Mazda Mazda5, 2006-2010, 4-door, hatchback, matching the title. No notes or width.
What that means for installation. Direct-over-surface mounting means no drilling and no removing trim. Clean the pillar faces as that tab describes, and let them dry.
Checking your vehicle. The Mazda5 row covers 2006 to 2010. If anything about your Mazda5 doesn't match the row, call Quality Automotive Trims at 877-752-3811 with PP10756 before ordering.
Inspect the pillars first. Every Mazda5 in this range has some age on it, so give the pillar finish a careful look in good light. Chalky, peeling or chipped finish gives tape a poor surface to grip. Repair those spots before any trim goes on. Then clean: soapy water, rinse, dry, and rubbing alcohol on a clean cloth until it wipes clean. Let it evaporate.
Organize the six pieces. Order the Mazda5 pieces front to back with the gallery's help. Hold each to its pillar with the liner on and look at how its edges line up with the pillar's edges. When it matches, write the position on the liner. If a piece seems wrong, try it on another pillar before assuming a problem; similar pieces are easy to confuse. With six polished stainless covers to place on the Mazda5, the photos are the reference at every step.
Install in order. Peel a liner, align the piece, and press firmly along its full length, then run a fingertip down both edges. Repeat for the next. Step back and check it. Then do the rest the same way and compare. Work on a dry day inside the Installation tab's temperature range, preferably in shade, and allow the listed cure time before the first wash.
Choosing between the sets. The four-piece PP10755 is the quicker job. This six-piece set has two more pieces than PP10755. Whether the sets overlap isn't stated, so pick the one whose photos match the look you want, or call.
Tools for the job. Soapy water, clean microfiber towels, rubbing alcohol, a roll of painter's tape, a marker and the product photos on a phone. Small strips of painter's tape at the ends of each piece during the dry fit mark exactly where it should land once the liner comes off, which takes the guesswork out of the final placement.
Looking after it. Wash with mild soap and water and dry with a soft cloth. Avoid steel wool, abrasive pads and gritty polish.
PP10756 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10756 |
| UPC | 691821287475 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Mazda Mazda5 |
Fitment: PP10756
| Vehicle | Years | Body style |
|---|---|---|
| Mazda Mazda5 | 2006-2010 | 4-door, Hatchback |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Mazda Mazda5
- PP10755: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10756 Pillar Post Trim
What does PP10756 fit?
The 2006-2010 Mazda Mazda5, 4-door hatchback.
How does it differ from PP10755?
It has six pieces; PP10755 has four. The photos show where the further pieces go.
How many pieces?
Six.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's the material?
Polished 26 gauge 304 stainless steel, made in the USA.
