Product Description
6-Piece Polished Pillar Trim for the 2016-2020 Buick Envision (PP56581)
PP56581 gives the Buick Envision's window line more polish than the base kit without going to the largest set. Six pieces of 304 stainless steel are cut to fit the pillar posts of the 4-door Envision SUV from 2016 to 2020.
Where six pieces fits in
QAA catalogs four pillar kits for this Envision. Counting by pieces, they are four (PP56580), six (this kit), eight (PP56582), and ten (PP56583). The catalog does not say which post each piece goes on, so compare the photos on all four listings. Six pieces is a good balance for owners who want a fuller frame around the glass but would rather not handle eight or ten pieces during install.
A look at the part
Pillars are the upright supports between and beside the side windows. On the Envision they frame tall SUV glass. Steel covers over them turn a dark area into a bright outline. It is a cosmetic accent that sits over the existing surface and changes the look of the whole side of the vehicle.
Materials
The six pieces are made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. This is solid stainless, not chrome-plated plastic. The bright finish runs through the steel, and every piece matches.
How to install
The six Envision pieces go directly over the existing pillar surface with 3M automotive-grade acrylic foam tape, and nothing is removed. QAA states that tape will hold for a lifetime and won't mark the Buick.
Good prep makes all the difference. Wash and dry the pillars, then wipe them clean so the tape bonds to the surface and not to residue. Lay out the six pieces in order, test-fit each one, and peel the liner only when you are happy with the position. Fit the Envision covers one post at a time, matching each to the photos. The Installation tab has the full sequence.
Fitment
QAA lists this kit for the Buick Envision 4-door SUV, model years 2016, 2017, 2018, 2019, and 2020. The Fitment tab shows the application exactly as cataloged. Other body styles are not listed.
Deciding between kits
If you are torn between six and eight pieces, think about how much of the existing pillar finish you want to leave showing. Fewer pieces leaves more of it; more pieces covers more. Each Envision kit is a complete set, not a top-up for a smaller one, so pick the coverage you want from the start.
Specs and contact
Part number PP56581 has UPC 691821469826, listed on the Specs tab with the material and piece count. For fitment questions or help choosing, call Quality Automotive Trims at 877-752-3811.
On darker and lighter paint
How the trim reads depends partly on paint color. On a dark Envision, polished steel pillars stand out sharply and frame the glass with strong contrast. On a light color, the effect is softer, closer to a bright factory accent. In both cases, six pieces gives enough coverage for the frame to look complete and intentional from the curb.
PP56581 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP56581 |
| UPC | 691821469826 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2020 Buick Envision |
Fitment: PP56581
| Vehicle | Years | Body style |
|---|---|---|
| Buick Envision | 2016-2020 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2020 Buick Envision
- PP56580: 4-piece Pillar Post Trim
- PP56582: 8-piece Pillar Post Trim
- PP56583: 10-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP56581 Pillar Post Trim
Where does PP56581 sit among the Envision kits?
It is the 6-piece kit. QAA also lists 4-, 8-, and 10-piece versions: PP56580, PP56582, and PP56583.
Which Envision years are listed?
2016 through 2020, 4-door SUV.
How does it attach?
With 3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without damaging the vehicle.
Is it metal?
Yes. Polished 26-gauge 304 stainless steel, made in the USA.
Who can help me choose a kit?
Quality Automotive Trims, 877-752-3811.
