Product Description
PP17089: Six-Piece Pillar Post Trim for the 2017-2020 Jaguar XE Sedan
Six covers of polished 304 stainless, made in the USA, for the pillars of a 2017-2020 Jaguar XE 4-door sedan. PP17089 is the larger of two XE pillar sets; the other is the four-piece PP17088. Nothing else is listed for the XE on this sheet.
The choice in plain terms
Both XE listings say the same things except for one: the number of covers. No notes, no widths, no pillar names on either. That leaves the gallery to show what six gets you over four. Open this set's photos alongside the four-piece ones and look for the outlines that appear only here. If those are covers you want, this is your set. If not, the smaller set may suit you better. If both XE sets tempt you, the galleries or a call will decide it. A call to Quality Automotive Trims at 877-752-3811 can settle any doubt, so have PP17089 ready.
Is my XE covered?
The single row reads Jaguar XE, 2017-2020, 4-door, Sedan. That's four model years and one body. These six XE covers carry the same 2017-2020 row. Anything outside that row should be confirmed by phone first.
Stainless, not plating
The covers are 26 gauge 304 stainless steel with a polished face. The shine is polished into the metal, so there's no coating to crack or lift at an edge. The light gauge lets each cover follow the surface it's laid on.
Tools you'll want
Very few. Mild car soap, a bottle of rubbing alcohol, two or three clean lint-free cloths, a roll of painter's tape and a pencil. A second person is handy with six covers: one holds the next piece and watches the line from a few steps away while the other presses. Allow an unhurried session rather than squeezing it in.
No drilling
Each cover bonds with 3M automotive-grade acrylic foam tape, directly over the existing surface. Nothing is drilled, unclipped or removed. Follow the temperature range and cure time on the Installation tab.
Preparing the XE
Start with a soap-and-water wash, then rinse and dry with a microfibre. Next, wipe each pillar area with rubbing alcohol on a clean rag and leave it a moment to evaporate. Strip any wax or ceramic coating where tape will land, since those layers keep it from gripping. Work on a dry day and out of hard sun.
Six covers, one at a time
Unpack, count six, and match each to the photos. Match them to the photos, keeping the backings on. Hold each to the car, sight along its edges and mark the spot with painter's tape, then pencil the location on the backing. When every cover has a place, peel and press them in turn, rubbing firmly from end to end and along both edges. Compare each new cover with those already fitted so they stay even. Step back now and then to check the lines.
If something's wrong
Bent or missing piece? Call before you start. A cover that won't seat during the dry-fit should keep its backing until you've phoned 877-752-3811. Once cured, wash the trim along with the car using regular soap.
PP17089 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP17089 |
| UPC | 691821689859 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2020 Jaguar XE |
Fitment: PP17089
| Vehicle | Years | Body style |
|---|---|---|
| Jaguar XE | 2017-2020 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2020 Jaguar XE
- PP17088: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP17089 Pillar Post Trim
What does PP17089 fit?
The 2017-2020 Jaguar XE, 4-door Sedan.
How many pieces?
Six polished 304 stainless steel covers. PP17088 has 4.
Which pillars are included?
The listing doesn't say. Check the photos or call 877-752-3811.
Should I buy both XE sets?
No. Open PP17088 alongside this listing to compare the XE covers, or phone us.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
