Product Description
Honda Civic Hatchback 2016-2020 Rear Bumper Trim, Polished Stainless (RB16214)
RB16214 is recorded for the Honda Civic 4-door hatchback, model years 2016 through 2020, not the sedan. It is a single rear bumper accent in mirror-polished 304 stainless steel, made in the USA, that installs with 3M tape.
Hatchback only
Only the 4-door hatchback is on this record. A different Civic body is not listed for this accent. If your Civic has a separate trunk lid, this is not the record for it; call or check the Fitment tab.
Years
2016, 2017, 2018, 2019, and 2020. One record covers all five years, so the same accent is listed for each.
Linked hatchback trim
- LP16214, a license plate bezel
- RD16214, a rear deck accent
- WS16214, a six-piece window sill set covering the face of the sills only
- TH16214, a four-piece lower rocker kit with a tapered width
- PP16214, PP16215, and PP16216, pillar kits with four, six, and eight pieces
The part
A rear bumper accent is a polished strip that adheres to the bumper cover for a bright detail at the back. It does not change the bumper underneath.
Steel
26 gauge, 304 stainless, mirror finish. Solid metal, not plating.
Mounting
For the Civic hatchback, the bumper accent fits on the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, it will hold for a lifetime without harming the Honda.
Preparing the surface
Wash and dry the bumper. Wipe the area where the strip will sit with a residue-free cleaner to strip wax, sealant, or dressing. Touch up any chips there before you start.
How to install it
Choose a dry day with mild temperatures. Dry-fit the accent with its liner, using the photos for position, and measure from each end to the bumper edges. Mark the line with masking tape. Peel and press firmly, center first, then out to the ends. Leave it unwashed for a few days. The Installation tab has full instructions.
Keeping it clean
Mild soap, water, and a soft towel. Abrasive pads leave fine scratches in a mirror finish.
Pair it with the plate bezel
The bumper accent and license plate bezel sit close to each other on the back of the hatch, so installing both at once gives a coordinated look.
Getting it centered
With only one piece, there is nothing to balance it against, so take a tape measure to both ends during the dry-fit. When the distances to the bumper edges match, mark the line and press. A last look at eye level from directly behind the car catches any tilt before the tape sets.
Why stainless
The finish is the metal itself, so there is no chrome layer to wear thin with years of washing. It keeps the same mirror face with ordinary care; check other QAA listings for their finish before pairing them.
Part details
SKU RB16214, UPC 691821494255. Call Quality Automotive Trims at 877-752-3811 if you are not sure whether your Civic is the hatchback listed here, or if you want help choosing companion pieces.
RB16214 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB16214 |
| UPC | 691821494255 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2020 Honda Civic |
Fitment: RB16214
| Vehicle | Years | Body style |
|---|---|---|
| Honda Civic | 2016-2020 | 4-door, Hatchback |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2020 Honda Civic
- PP16214: 4-piece Pillar Post Trim
- PP16215: 6-piece Pillar Post Trim
- PP16216: 8-piece Pillar Post Trim
- TH16214: 4-piece Rocker Panel Trim, Lower Kit
- LP16214: 1-piece License Plate Bezel
- RD16214: 1-piece Rear Deck Accent
- WS16214: 6-piece Window Sill Trim Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB16214 Rear Bumper Trim Accent
Which Civic does RB16214 fit?
The 4-door Honda Civic hatchback, 2016 through 2020.
Does it fit the Civic sedan?
The sedan is not on this record. Call 877-752-3811.
How many pieces?
One.
What other rear trim pairs with it?
LP16214 license plate bezel and RD16214 rear deck accent.
Does the bumper need to be removed first?
No. It attaches with 3M automotive-grade acrylic foam tape.
