Product Description
1998-2002 Lincoln Town Car Rear Bumper Trim, One Polished Piece (RB38680)
RB38680 is a single stainless steel trim piece for the rear bumper of the Lincoln Town Car 4-door sedan, model years 1998 through 2002. It is 304 stainless with a mirror polish, made in the USA, and mounted with 3M tape over the existing bumper surface.
Only the earlier years
This record is limited to 1998, 1999, 2000, 2001, and 2002. QAA catalogs a separate rear bumper trim for later Town Cars, so owners of a newer car should not order this one. Your registration or the build date label will confirm the year.
A small, focused lineup
Two other QAA pieces are linked to this sedan:
- RD38680, a two-piece rear deck accent, 3.5 inches wide, with a trim crease
- WZ38680, a four-piece wheel well fender trim molding, 2.25 inches wide
The deck accent is the natural partner. It sits on the trunk lid above the bumper, so the two together put two lines across the back of the car; check that listing for its finish.
What it is
A rear bumper trim accent is decorative bright work that adheres to the bumper cover. It does not replace or alter the bumper.
The steel
26-gauge 304 stainless steel, mirror polished. Since the shine is the metal itself, nothing peels or flakes with time.
How it mounts
The Town Car piece fastens with 3M automotive-grade acrylic foam tape straight onto the bumper as it is. QAA states the tape holds for a lifetime without damaging the Lincoln's surface.
Preparing older paint
A Town Car from these years has seen years of wax and dressing, so clean it well. Tape will not hold well on that layer. Wash the bumper with a strong car soap, rinse, and dry, then wipe the spot with a residue-free cleaner. Look closely for cracking or peeling paint where the trim will sit and fix it first.
Positioning
Dry-fit the trim with its liner on and compare it with the photos. Measure from each end to fixed points on the Town Car bumper, and mark the line with low-tack tape. If you are also installing the deck accent, do that first and use it as a reference for centering.
Applying it
Pick a dry, mild day. Peel the liner, set the piece on your marks, and press firmly from the center toward each end. Wait a few days before washing. The Installation tab gives full instructions.
Care
Mild soap, water, and a soft towel keep the polish clear. Avoid abrasive pads or rubbing compounds on the face.
Why one piece makes sense here
A single strip means one alignment and one press, so the install is quick even for a first-timer. The work is mostly in the prep and the measuring. Take your time with the guide line, because a single long accent shows any tilt from behind the car. Once it is set, there is nothing more to adjust.
Part details
SKU RB38680, UPC 691821344574. If you are not sure which Town Car you have, call Quality Automotive Trims at 877-752-3811 before ordering.
RB38680 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB38680 |
| UPC | 691821344574 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1998-2002 Lincoln Town Car |
Fitment: RB38680
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Town Car | 1998-2002 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1998-2002 Lincoln Town Car
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB38680 Rear Bumper Trim Accent
Which Town Car years does RB38680 fit?
The 4-door Lincoln Town Car sedan, 1998 through 2002.
Does it fit a later Town Car?
No. Later years have a separate listing. Call 877-752-3811 if unsure.
How many pieces?
One.
What pairs with it at the rear?
RD38680, a two-piece rear deck accent with a trim crease.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
