Product Description
Chevrolet Tahoe and Suburban 2021-2026 Liftgate Accent, Polished Stainless (RD61190)
The title and the fitment record for RD61190 both list two vehicles: the Chevrolet Tahoe 4-door SUV and the Chevrolet Suburban 4-door SUV, for model years 2021 through 2026. If you drive a Suburban from those years, this is the same listing for you.
A width question worth a phone call
Its product bullet describes the strip as 7/8" wide, and the Specs tab carries that figure. Seven-eighths of an inch is a slim line across the gate rather than a broad panel, so it reads as an accent more than a cover. Look closely at the product photos to judge how it will sit on your SUV, and call Quality Automotive Trims at 877-752-3811 for a measurement before ordering if the size matters to you.
Material and make
One piece of 26-gauge 304 stainless steel, polished to a mirror and made in the USA. QAA catalogs it as a rear deck accent; on these two SUVs it belongs on the rear liftgate.
How it stays put
On the Tahoe, the accent is held by 3M automotive-grade acrylic foam tape against the existing liftgate surface. QAA states the tape keeps hold for a lifetime without harming the Chevrolet.
What else is linked to these SUVs
The record ties six more parts to the Tahoe and Suburban. Several sit at the back: TP61190, a one-piece trunk hatch accent trim listed at 1 inch; DH61190, a one-piece tailgate handle accent; LP61190, a license plate bezel; and RW61190, a two-piece rear window trim. On the sides there is GC61190, a gas door cover trim, and WQ61190, a four-piece wheel well accent at 1.375 inches. Each has its own listing and photos, so check each one for its finish.
Deck accent or hatch accent?
Because TP61190 is also a rear piece for the same SUVs, compare its photos with this listing's to see where each one sits. The data names them differently but doesn't describe their positions, so the photos are the guide.
Prep on a big gate
Wash the gate, then dry it completely. Clean the strip's footprint with a residue-free cleaner, changing cloths until one stays clean, and touch up any chips under the tape area.
Fitting
Hold the strip against the gate with the liner on and line it up to the photos. Measure from both ends to the gate edges, adjust until equal, and mark the top edge with painter's tape. Peel the liner, press the center, then work out to each end. Choose a dry day in mild weather. The Installation tab has the full sequence.
Day to day
Give the tape a few days before the first wash. After that, mild soap and a soft cloth. Polished 304 has no plating, so a light scuff shows more of the same steel.
Not a factory part
It's a decorative overlay. The liftgate, its handle, and its hardware work as before.
Quick checklist
- Tahoe or Suburban, 2021 to 2026, 4-door SUV
- Width confirmed by phone or photos
- Clean, wax-free paint where the tape will sit
SKU RD61190, UPC 691821658206.
RD61190 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD61190 |
| UPC | 691821658206 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7/8" |
| Coverage / notes | 7/8" Width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2021-2026 Chevrolet Tahoe and 2021-2026 Chevrolet Suburban |
Fitment: RD61190
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Tahoe | 2021-2026 | 4-door, SUV |
| Chevrolet Suburban | 2021-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Tahoe
- DH61190: 1-piece Tailgate Handle Accent Trim
- GC61190: 1-piece Gas Door Cover Trim
- LP61190: 1-piece License Plate Bezel
- RW61190: 2-piece Rear Window Trim
- TP61190: 1-piece Trunk Hatch Accent Trim
- WQ61190: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD61190 Rear Deck Accent
Does RD61190 fit a Suburban?
Yes. The fitment record and the title list the Chevrolet Suburban 4-door SUV, 2021 through 2026, along with the Tahoe.
How wide is it?
The bullet gives 7/8", and the Specs tab shows the same. Call 877-752-3811 for a measurement.
What other rear parts are linked?
TP61190 trunk hatch accent, DH61190 tailgate handle accent, LP61190 license plate bezel, and RW61190 rear window trim.
Is trim removal needed on the hatch?
No, it mounts with 3M tape over the existing surface.
