Product Description
Stainless Liftgate Handle Trim for the 2021-2026 Chevrolet Tahoe and Suburban (DH61190)
The Chevrolet Tahoe and Suburban share this rear handle accent. DH61190 is one piece of polished 304 stainless steel, 26 gauge, made in the USA, listed by QAA as tailgate handle accent trim for both the Chevrolet Tahoe and the Chevrolet Suburban. On these SUVs, that means the handle on the rear liftgate.
Years and models
The title and the fitment rows agree on this one:
- Tahoe (Chevrolet) 4-door SUVs, 2021-2026
- Suburban (Chevrolet) 4-door SUVs, 2021-2026
So a Tahoe or a Suburban from 2021 through 2026 is on the list, and the title names both. If your SUV falls outside those years, call before you order. The Fitment tab shows the rows as entered.
The piece itself
This listing carries no "surround" or cover note, and no dimensions. The photos are the best guide to its shape and how it sits relative to the handle, so compare them with your liftgate before ordering.
Stainless steel advantages
Polished 304 stainless takes its brightness from the metal itself rather than from plating. The thin 26-gauge piece lies flat against the Tahoe's liftgate panel.
Mounting
The tailgate handle trim fits straight over the Tahoe or Suburban's current surface using 3M automotive-grade acrylic foam tape. According to QAA, the tape holds for a lifetime without harming the paint.
Install routine
Wash the handle area, rinse and degrease. Let it dry completely. With the liner on, place the trim and judge it from directly behind the SUV, then mark its corners with painter's tape. Peel the liner, align with the marks, and press firmly over the whole piece. Repeat the pressure a minute later. The Installation tab lists the steps in full.
Dressing the whole rear
QAA cross-lists several pieces that also go on these SUVs:
- TP61190, a 1pc trunk hatch accent trim, listed at 1" wide
- RD61190, a 1pc rear deck accent for the back, with a note of 7/8" width
- LP61190, a 1pc license plate bezel
- RW61190, a 2pc rear window trim
- GC61190, a 1pc gas door cover trim
- WQ61190, a 4pc wheel well accent trim, 1.375" wide
RD61190 is listed at 7/8" wide, so see that part's page for its own details. Combining this handle trim with the hatch accent or plate bezel gives the back of the SUV a matched look.
Before ordering
Find your SUV and year in the rows above, then hold the photos up to your own liftgate handle. If the shapes look alike and your SUV is listed, you're set. If not, or if your liftgate has other features near the handle, call first.
Weather
Pick a mild, dry day and avoid direct sun. Leave the SUV dry overnight, and degrease twice on waxed paint.
Upkeep
Care is simple on the Chevrolet: mild soap and a soft towel. Keep steel wool and scouring pads away from the polish.
Questions
Tahoe owners can ring Quality Automotive Trims at 877-752-3811 about DH61190. The UPC is printed under Specs.
DH61190 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH61190 |
| UPC | 691821466955 |
| Part type | Tailgate Handle Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2021-2026 Chevrolet Tahoe and 2021-2026 Chevrolet Suburban |
Fitment: DH61190
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Tahoe | 2021-2026 | 4-door, SUV |
| Chevrolet Suburban | 2021-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Tahoe
- GC61190: 1-piece Gas Door Cover Trim
- LP61190: 1-piece License Plate Bezel
- RD61190: 1-piece Rear Deck Accent
- RW61190: 2-piece Rear Window Trim
- TP61190: 1-piece Trunk Hatch Accent Trim
- WQ61190: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tailgate Handle Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH61190 Tailgate Handle Accent Trim
Does DH61190 fit the Suburban?
Yes. QAA lists the 2021-2026 Chevrolet Suburban along with the 2021-2026 Chevrolet Tahoe.
Does it fit a 2026?
The fitment rows list 2021-2026. Call 877-752-3811 if you want to confirm.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
