Product Description
Chevrolet Tahoe and GMC Yukon 2007-2014 Stainless License Bar (LB47295)
LB47295 has two fitment rows: the Chevrolet Tahoe 4-door SUV, 2007 through 2014, and the GMC Yukon 4-door SUV, 2007 through 2014. Same years, same body style, one part number, and the title names both. If you drive either one from those years, it is covered; a call to Quality Automotive Trims at 877-752-3811 with the part number can confirm it before you order.
The bar itself
The Yukon bar is a single piece, cataloged as License Bar, Above plate accent Trim, cut from mirror-polished 26-gauge 304 stainless and made in the USA. 3M automotive-grade acrylic foam tape holds it over the liftgate's existing surface, so nothing is drilled. Per QAA, that tape will hold for a lifetime with no damage to the GMC's surface.
The catalog lists no width, and no note about key access, a camera opening or a logo cutout. On a liftgate where the plate area may hold a handle, badge or other hardware, that means the product photos are the reference. Compare them closely with your own vehicle, Tahoe or Yukon, before ordering.
Eight model years, two badges
The listing covers eight model years across two nameplates, so take a moment to check yours. It should read Chevrolet Tahoe or GMC Yukon, and a year from 2007 to 2014. The rows list the 4-door SUV only. Variants under a different name aren't listed here, so call before ordering for one of those.
Prep and install
A large liftgate on a vehicle from these years has usually built up wax and road film around the plate. Wash, rinse and dry, then wipe with rubbing alcohol until a clean cloth comes away clean. Check the paint for chips or lifting clear coat where the bar will go. Hold the bar in place, liner on, and step well back; on a big panel, an off-center bar is easy to spot. A helper behind the vehicle can call out small adjustments. Measure from each end of the bar to the plate's edges so the two gaps match, then mark the ends with painter's tape. Peel, align, and press firmly from the middle out. Remove the marks and press again. Close the liftgate gently for the first day. The Installation tab lists the temperature range.
One related part
The sheet cross-lists TH47196, a four-piece lower rocker kit at 1" that sits on the doors only and spans from the bottom of the door up to that width. Its number doesn't follow this bar's pattern, so check its listing's fitment rows against your vehicle and its photos for finish.
Before you peel the liner
Do one last check with the bar held in place: the plate, any handle or hardware, and the bar should all look evenly spaced from directly behind. If something sits in the way that the photos didn't show, stop there and call.
Upkeep
Mild soap, water and a soft towel are all the polished surface needs. Avoid steel wool and abrasive compounds.
LB47295 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB47295 |
| UPC | 691821431793 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2014 Chevrolet Tahoe and 2007-2014 GMC Yukon |
Fitment: LB47295
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Tahoe | 2007-2014 | 4-door, SUV |
| GMC Yukon | 2007-2014 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Tahoe
- TH47196: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB47295 License Bar, Above plate accent Trim
Does LB47295 fit a Chevrolet Tahoe?
Yes. The fitment rows and the title list the 2007-2014 Tahoe 4-door SUV along with the Yukon. Phone 877-752-3811 before you order if anything about your SUV is unclear.
Which years are covered?
2007 through 2014 for both models.
How wide is it?
No width is listed. See the photos.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
