Product Description
Cadillac XTS 2013-2017 License Bar Extension Trim in Polished Stainless (LB53245)
LB53245 is a two-piece License Bar Extension Trim for the Cadillac XTS 4-door sedan, model years 2013 through 2017. If you're browsing the XTS parts QAA lists, this is one of four on the sheet, and the one cataloged as a license bar.
What we know
Two pieces. 26-gauge 304 stainless steel, polished to a mirror finish, made in the USA. Mounts with 3M automotive-grade acrylic foam tape, installed directly over the existing surface, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Five model years on one fitment row.
What we don't
The listing has no width, and it doesn't describe what the extension extends or how the two pieces are laid out. Other parts on this XTS list carry placement notes; this one doesn't. The product photos show the arrangement, so they are the reference. If your XTS's trunk area doesn't look like the photos, ring Quality Automotive Trims at 877-752-3811 and mention LB53245.
A restriction that belongs to a different part
ML53245, a two-piece accent on the same list, is noted Fits Between Rear Marker Lights, fits model with Dual Exhaust only. That dual-exhaust restriction is on ML53245's listing, not this one. LB53245's own fitment row has no exhaust or trim condition. If you're planning both parts, check the ML53245 restriction against your car separately.
The other two XTS parts
LP53245 is a one-piece license plate bezel that frames the plate itself. WQ53245 is a four-piece wheel well accent trim. Using the bezel and this extension together puts two pieces of brightwork around the plate, so look at both listings' photos side by side first. Check each for its finish.
Why two pieces
The catalog gives the count without the reason. Whatever the layout, a two-piece accent depends on both pieces matching, so plan for a slower dry fit than a single bar would need.
Installing the pair
Work on a dry day in the range on the Installation tab. Wash, dry and alcohol-wipe the whole area. Place both pieces, liners on, following the photos. From behind the car, check they sit evenly, then confirm with a tape measure. Painter's tape marks at the ends hold the layout. Peel and press the first piece, align and press the second, then go over both with firm pressure. Remove the marks and press once more. Keep the trunk closed gently for the first day.
Paint condition
Before any tape goes on, inspect the paint in good light. Old adhesive, chips or lifting clear coat will weaken the bond. Clean off residue and fix any flaking finish first.
Confirming your car
The XTS is the only vehicle on this listing, 4-door sedan, from 2013 to 2017. Make sure your XTS is inside that span. If anything on your paperwork suggests a body style other than the 4-door sedan, call before ordering. It's also worth photographing the area around your plate before you call, so we can compare it with the part while we talk.
Upkeep
Wash with mild soap and water and dry with a soft cloth. Keep abrasives off the polish.
LB53245 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB53245 |
| UPC | 757565504428 |
| Part type | License Bar Extension Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2017 Cadillac XTS |
Fitment: LB53245
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac XTS | 2013-2017 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2017 Cadillac XTS
- LP53245: 1-piece License Plate Bezel
- ML53245: 2-piece Marker Light Accent
- WQ53245: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar Extension Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB53245 License Bar Extension Trim
Which XTS years does LB53245 fit?
2013 through 2017, 4-door sedan.
Does it require dual exhaust?
No. The dual exhaust note belongs to ML53245, not this part.
How many pieces?
Two.
How does it mount?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How wide is it?
No width is listed. See the photos or call 877-752-3811.
