Product Description
Ford F-150 Extra Cab Long Bed 1987-1996 Full Rocker Kit, 6" Molding to Door Bottom, 10 Pieces (TH17313)
On a 1987 through 1996 Ford F-150 Extra Cab with the long bed, TH17313 fills the lower body from the side molding down to the bottom of the doors. QAA lists it as a ten-piece Full Kit, 6" wide, with the note "Spans from the bottom of the molding to the bottom of the door." The fitment row tags it as a 2-door.
Six inches of steel
The 6" width is the height of the band between molding and door bottom that this kit is cut for. Measure that gap on your truck before ordering. If it isn't close to six inches, or your F-150 has lost its molding, stop and call 877-752-3811.
Long bed, no dually tag
The fitment row reads Extra Cab, Long Bed, with no mention of dual rear wheels. The linked TH17301 is a different listing: a ten-piece, 3" Lower Kit for the Extra Cab short bed dually. QAA also catalogs other F-150 rocker kits from this era for other cab and bed combinations; confirm yours before ordering.
Material and adhesive
- Polished 26-gauge stainless, grade 304, high quality
- F-150 kit made in America
- Ten pieces on 3M automotive-grade acrylic foam tape
- Sits over the F-150's current surface
For the Extra Cab long bed F-150, QAA states the tape will hold for a lifetime without damaging the truck's finish.
Ten-piece layout
The record doesn't say how the pieces are split, so match them to the photos. Use the photos, and number the pieces in order of installation.
Paint condition matters
Run your hand along the panels below the molding. Chalky paint can be polished back to a firm surface; paint that lifts or shows rust underneath must be repaired and cured before trim goes on. Fill any old trim-mounting holes in that area at the same time.
Cleaning
Wash and dry. Use isopropyl alcohol on a folded cloth to clean right into the corner under the molding, then across the full six-inch band down to the bottom edge.
Placement
Dry-fit a full side, liners on, each piece tucked up under the molding and down to the door bottom. Check every joint and open each door. Then peel and press piece by piece, with firm pressure across the full height.
Wheel wells
WZ17308 and WZ17308-AP, both four-piece wheel well fender trim moldings, are linked and tagged 4-door. Their difference isn't stated; call before ordering.
What you'll need
Car soap, isopropyl alcohol, lint-free cloths, painter's tape, a tape measure for the molding gap, and some patience. The tape does all the holding.
Allow time
A warm, dry day and a helper. Large pieces on an older truck go on best when the panels are warm, so let it sit in the sun or a garage first. About a day before the first wash, and keep it out of deep water.
Care
Rinse off winter salt and polish the steel with a non-abrasive product.
The 1987-1996 F-150 Extra Cab kit is TH17313 (UPC 691821537822), and 877-752-3811 is the number for questions.
TH17313 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH17313 |
| UPC | 691821537822 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1987-1996 Ford F-150 |
Fitment: TH17313
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 1987-1996 | 2-door, Pickup Truck, Extra Cab, Long Bed |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1987-1996 Ford F-150
- TH17301: 10-piece Rocker Panel Trim, Lower Kit
- WZ17308: 4-piece Wheel Well Fender Trim Molding
- WZ17308-AP: 4-piece Wheel Well Fender Trim Molding
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH17313 Rocker Panel Trim, Full Kit
Which F-150 does TH17313 fit?
1987 through 1996 Extra Cab, long bed.
How tall is it?
6", from the bottom of the molding to the bottom of the door.
Does it need molding?
The note uses the molding as the top edge. Call 877-752-3811 if yours is missing.
What is TH17301?
A ten-piece 3" Lower Kit listed for the Extra Cab short bed dually.
How many pieces?
Ten.
