Product Description
Chevrolet Suburban 2015-2020 Upper Rocker Kit, 6.375", 4 Pieces (TH55198)
TH55198 is a four-piece polished stainless steel Upper Kit for the 2015-2020 Chevrolet Suburban, the 4-door SUV. Its listed width is 6.375", and its note says the pieces span "from the bottom of the molding DOWN to the specified width."
Reading the placement note
Upper Kits in QAA's catalog are measured from a molding line downward, so the reference point for this one is the bottom edge of the side molding on your Suburban, not the bottom of the door. From there the steel runs down by 6.375". If your Suburban's molding has been removed or changed, call 877-752-3811 with a photo before ordering, since the kit depends on that edge.
A wide panel of steel
At 6.375", this is a broad section of polished metal below the doors. A quick way to see it before buying is to run a strip of painter's tape along the bottom of the molding and mark a second line 6.375" below it. Step back and look at the area between the two lines; that is roughly the band the kit covers.
What it's made from
For the 2015-2020 Suburban, four 6.375" strips cut in the USA from polished 26 gauge 304 stainless go below the molding on 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime and won't mark the Chevrolet SUV.
Four pieces, four doors
The kit has four pieces. The record doesn't say which piece goes where, so lay them out by shape and compare with the photos. A strip of painter's tape on each liner with its position saves confusion later.
Linked Suburban parts
- WQ55198: a four-piece wheel well accent kit, 1.5"
- MI55198: a four-piece body molding insert kit, 1"
- RR55198: a six-piece roof rack trim with a seam cap piece
RR55198 carries an important note: it "adheres to the existing factory SS Roof Rack Trim," and you must already have that rack trim to use it. Check each listing for its own finish and requirements.
Prep along the molding
Dirt collects right under a molding edge. Wash the area, use a soft brush along the seam, rinse and let everything dry. A wipe of isopropyl alcohol just before installing removes wax and leftover soap.
Align to the edge
Tape each piece up dry and check that its top edge follows the bottom of the molding all the way along. Open each door to be sure the steel doesn't catch on the body. Small shifts are easy now and impossible once the tape grabs.
Installing
Peel back a short section of liner at one end, set it against your marks, and press. Work along the piece, peeling as you go, and finish with a firm full-length pass. Work on a mild, dry day out of direct sun.
Washing afterward
Wait a day before the first wash. Use mild soap and a soft cloth; skip abrasive pads on the polished surface.
Call 877-752-3811 with any fit question. Quality Automotive Trims, SKU TH55198, UPC 691821366484.
TH55198 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH55198 |
| UPC | 691821366484 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.375" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2020 Chevrolet Suburban |
Fitment: TH55198
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Suburban | 2015-2020 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2020 Chevrolet Suburban
- WQ55198: 4-piece Wheel Well Accent Trim
- MI55198: 4-piece Body Molding Insert Trim Kit
- RR55198: 6-piece Roof Rack Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH55198 Rocker Panel Trim, Upper Kit
Where does TH55198 install?
From the bottom of the molding down, 6.375" wide.
Will it fit a Tahoe?
The record lists only the 2015-2020 Chevrolet Suburban. Call 877-752-3811 about any other model.
What do I need for RR55198?
That listing says it adheres to the existing factory SS roof rack trim, which you must already have.
How many pieces?
Four.
