Product Description
TH58655 Lincoln Navigator 2018-2024 Lower Kit, 4 Pieces, 5"-6" Taper, Follows Under the Factory Molding (Not the L)
TH58655 is a four-piece polished stainless steel Lower Kit for the 2018-2024 Lincoln Navigator 4-door SUV. The note reads "Tapered Width - 5"-6", Follows under the factory molding, does not fit the "L" version," and the pieces span "from the bottom of the door UP to the specified width."
Two edges to work between
The note gives two reference points: the steel starts at the bottom of each door and "Follows under the factory molding." The taper runs from 5" to 6". The record doesn't describe the molding, so compare the photos with your SUV. If the molding has been removed or replaced, call 877-752-3811 first.
Standard body only
The note rules out the "L" version. Check for "L" on your registration or window sticker. The record doesn't say what fits the L in these years; call us.
Years
The fitment ends in 2024. If your Navigator is newer, this record doesn't cover it. Call us and we'll check.
Material
QAA builds the 2018-2024 Navigator kit from four tapered pieces of polished 26 gauge 304 stainless steel made in the USA, following under the factory molding with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without damage.
Nothing linked
This record has no sibling listings, so any other trim for your Navigator is a separate question. Ask us.
Measure between the edges
At the front and rear of each door, measure from the bottom edge up to the molding. Compare those figures with 5" and 6". If they differ noticeably, send us the numbers and a photo.
Clean both edges
Dirt collects under a molding and along a door's bottom edge. Wash both, rinse, dry the seam, and wipe the area with isopropyl alcohol.
Trial fit
Tape each piece up. Its top should run along the underside of the molding and its bottom along the door edge. Swing each door.
Pressing
Peel a short length of liner, set, press, and continue. Finish with firm pressure.
Matching and care
Keep later positions in line with the first pieces. Wait a day, then wash with mild soap and a soft cloth.
Before ordering
Three checks: the year falls between 2018 and 2024, the body is the standard Navigator rather than the L, and the factory molding the note mentions is still on the doors. If all three hold, compare the photos with your SUV. If any one is uncertain, a side photo to 877-752-3811 settles it before the box ships.
Supplies and conditions
Painter's tape, a tape measure, isopropyl alcohol, a soft brush for the molding seam and lint-free cloths. Choose a mild, dry day and keep the work out of direct sun. A helper makes it easier to hold each piece against the molding while you check it from a few steps back.
Questions about the L or the year range? Call 877-752-3811. Quality Automotive Trims, SKU TH58655, UPC 691821676071.
TH58655 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH58655 |
| UPC | 691821676071 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Tapered Width - 5"-6", Follows under the factory molding, does not fit the "L" version; Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2024 Lincoln Navigator |
Fitment: TH58655
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Navigator | 2018-2024 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH58655 Rocker Panel Trim, Lower Kit
Does TH58655 fit the Navigator L?
No. The note says it "does not fit the "L" version."
Where does it sit?
From the bottom of the door up, following under the factory molding.
How wide is it?
It tapers from 5" to 6".
How many pieces?
Four.
