Product Description
Infiniti G20 1991-1996 Sedan Full Kit TH92051, 3.75", Between the Wheel Wells, 6 Pieces
For the 1991-1996 Infiniti G20 4-door sedan, TH92051 is a six-piece Full Kit in polished stainless steel. The bullet reads "3.75" Width, Includes coverage between the wheel wells only," and per the placement note the kit "Spans from the bottom of the molding to the bottom of the door."
Half the width of its partner
The linked TH92050 has the same fitment, the same notes and the same between-the-wheel-wells coverage, but lists 7.5" and eight pieces. That's exactly twice this kit's width for what the record describes as the same space. The record doesn't explain it. Before ordering either, measure from the molding to the door bottom on your G20 and call 877-752-3811 with the result.
Measuring
- Hold a stiff ruler square against the G20's door
- Take the reading from the molding's bottom edge down to where the door ends
- Check both the front and back end of every door
- Note whether any door or molding has been replaced
Linked pillar sets
PP96050 (four pieces) and PP96051 (six pieces) are the G20 sedan Pillar Post Trim sets linked to this kit.
Six pieces, four doors
The record doesn't list positions, and six doesn't divide evenly across four doors. Sort the pieces with the photos and write each one's spot on its liner.
Construction
For the 1991-1996 G20 sedan, six 3.75" strips of USA-made polished 26 gauge 304 stainless fill the space between the wheel wells, held with 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime with no harm to the Infiniti.
Cleaning
- Wash and rinse the G20 under the molding.
- Clear away wax using a wax-and-grease remover.
- Repair chips or rust first.
- Alcohol-wipe each spot just before fitting.
Molding
The top edge of each piece meets the molding. Repair any loose or cracked section first.
Dry fit
Tape each piece up with painter's tape, check both edges and the ends near the wheel wells, and open each door.
Bonding
Peel the liner a few inches at a time, pressing the piece down firmly as you work along it.
Finishing the G20
Keep the G20 spacing consistent between all pieces.
Conditions
Mild, dry and shaded; no wash for a day.
Ordering
Send your readings first. Keep the box and liners until the work is done.
Where it stops
Like its partner, this kit is listed for the stretch between the wheel wells only. Nothing in the record describes pieces for the panels ahead of the front wheel well or behind the rear one.
One door at a time
Fit a single door and step back to check that the top edge meets the molding evenly along its whole length. It is far easier to reposition a piece while the liner is still on. Then carry on with the rest of that side.
A narrow band shows any tilt, so sight along the side from both ends during the dry fit and correct it before bonding.
Label every liner before you begin.
G20 kit TH92051, UPC 691821451814: call Quality Automotive Trims, 877-752-3811.
TH92051 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92051 |
| UPC | 691821451814 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 3.75" |
| Coverage / notes | Includes coverage between the wheel wells only; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1991-1996 Infiniti G20 |
Fitment: TH92051
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti G20 | 1991-1996 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1991-1996 Infiniti G20
- TH92050: 8-piece Rocker Panel Trim, Full Kit
- PP96050: 4-piece Pillar Post Trim
- PP96051: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92051 Rocker Panel Trim, Full Kit
Which G20 does TH92051 fit?
The 1991-1996 Infiniti G20 4-door sedan.
How is it different from TH92050?
TH92050 lists 7.5" and 8 pieces with the same notes. Call 877-752-3811 with your measurement.
How wide is it?
3.75".
How many pieces?
Six.
