Product Description
Infiniti Q45 1990-1996 Sedan Full Kit TH92040, 7.625", Between the Wheel Wells, 6 Pieces
For the 1990-1996 Infiniti Q45 4-door sedan, TH92040 is a six-piece polished stainless steel Full Kit. The bullet reads "7.625" Width, Includes coverage between the wheel wells only," and the placement note says it "Spans from the bottom of the molding to the bottom of the door."
Wheel wells or bumpers
The Q45 has two Full Kits at the same 7.625" width:
- TH92040: between the wheel wells only, 6 pieces (this kit)
- TH92042: "Full Length," 10 pieces
Both reach from the molding to the door bottom; the difference is how far along the car they go. The record says "Full Length" for the ten-piece kit without describing the ends further, so check its photos if you're weighing it.
Pillar trim
PP92040, a two-piece Pillar Post Trim set for the sedan, is also linked.
Six pieces, four doors
The count doesn't divide evenly, and the record doesn't list positions. Use the photos to sort the pieces and label each liner.
Measuring
The width is given to the eighth of an inch. Read from the molding's lower edge to the door bottom at the front and rear of every door, and compare with 7.625". Send us the readings if any stand out.
Steel and tape
Cut in the USA from polished 26 gauge 304 stainless, the six 7.625" Q45 pieces cover the area between the wheel wells on 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without damaging the Infiniti sedan.
Preparing a wide band
More than seven inches of paint sits under each piece. Wash it, strip wax and polish with a wax-and-grease remover, repair any chips or rust, and wipe it all with isopropyl alcohol just before fitting.
Molding
The top edge of each piece sits against the molding, so it must be straight and secure on all four doors.
Trial fit and bonding
Hold each piece with painter's tape and check both edges, then open each door. Peel the liner a section at a time and press across the full height.
Working back along the Q45
Keep the six Q45 gaps even.
Conditions
A dry, mild, shaded day. No washing for a day.
Ordering
Send the year, your readings, and whether you want the pillar trim too. Keep the box until every piece is on.
Choosing between the two
If you want the trim only along the doors and the panel between the wheel wells, this six-piece kit covers that. If you want it to continue toward the ends of the car, look at the ten-piece kit. The height is the same on both, so the line under the molding matches either way; only the length changes.
If the molding is damaged
A cracked, loose or missing section leaves the piece with no top edge to meet. Repair it first, and send us a photo if you are unsure.
Finish one door, step back and check, then move on.
Six-piece Q45 kit TH92040 (UPC 691821583577): Quality Automotive Trims, 877-752-3811.
TH92040 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92040 |
| UPC | 691821583577 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.625" |
| Coverage / notes | Includes coverage between the wheel wells only; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1996 Infiniti Q45 |
Fitment: TH92040
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti Q45 | 1990-1996 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1996 Infiniti Q45
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92040 Rocker Panel Trim, Full Kit
Which Q45 does TH92040 fit?
The 1990-1996 Infiniti Q45 4-door sedan.
Does it reach the bumpers?
No, it covers between the wheel wells only. TH92042 is the Full Length kit.
How wide is it?
7.625", molding to door bottom.
How many pieces?
Six.
