Product Description
Infiniti Q45 1990-1996 Sedan Full Length Rocker Kit TH92042, 7.625", 10 Pieces
TH92042 is a ten-piece polished stainless steel Full Kit for the 1990-1996 Infiniti Q45 4-door sedan. The width bullet reads "7.625" Width, Full Length," and the pieces span "from the bottom of the molding to the bottom of the door."
"Full Length"
The note is brief. It says "Full Length" and doesn't describe where the ends of the coverage are. What the record does show is the contrast with the six-piece TH92040, which is noted "between the wheel wells only." Look at this kit's photos to see exactly where the end pieces go, and call 877-752-3811 if you need it confirmed.
Q45 parts linked here
- TH92040: Full Kit, 7.625", between the wheel wells only, 6 pieces
- PP92040: Pillar Post Trim, 2 pieces
Measuring
Both Q45 Full Kits list 7.625" from the molding to the door bottom. Measure it on your car at the front and rear of each door. If the molding continues beyond the doors on your car, check the distance there too, in case the "Full Length" coverage reaches past them.
Material
The full-length 1990-1996 Q45 kit runs ten 7.625" pieces that QAA forms in the USA out of polished 26 gauge 304 stainless, secured with 3M automotive-grade acrylic foam tape. Per QAA, that tape will hold for a lifetime and leaves the Infiniti unmarked.
Ten pieces
The record doesn't list positions. Lay the pieces out in order from front to back, check them against the photos, and label each liner.
Prep along the whole length
- Wash and rinse along the full length you'll cover.
- Strip wax and polish from the Q45 with a wax-and-grease remover.
- Clean carefully around the wheel well edges.
- Fix chips or rust, then wipe with isopropyl alcohol.
Order of fitting
Dry fit the door pieces first so the gaps at the doors are right, then fit the end pieces. Open every door to check clearance. Bond with short liner peels and firm pressure across the full height.
The rest of the ten
Keep the Q45 gaps even across all ten pieces, including at the wheel wells.
Conditions
Mild, dry, in shade. Wait a day before washing.
Ordering
Send your year and readings. Keep the box and liners until every piece is on.
Why pick the longer kit
The six-piece kit stops at the wheel wells, leaving the panels ahead of and behind them bare. If you want the trim line to carry on past the wheel wells, this is the Q45 listing for that. Because it covers more of the car, the cleaning and the dry fit take longer, so allow more time.
Molding
The top edge of every piece meets the molding, so check that it is straight and firmly attached along the whole length you are covering. Repair any loose section before fitting.
Fit a run, step back and check it from the front and rear, then continue.
Sort and label all ten pieces before you begin, so none are swapped between sides.
Q45 set TH92042 carries UPC 691821678570; phone Quality Automotive Trims at 877-752-3811.
TH92042 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92042 |
| UPC | 691821678570 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.625" |
| Coverage / notes | Full Length; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1996 Infiniti Q45 |
Fitment: TH92042
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti Q45 | 1990-1996 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1996 Infiniti Q45
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92042 Rocker Panel Trim, Full Kit
Which Q45 does TH92042 fit?
The 1990-1996 Infiniti Q45 4-door sedan.
What does "Full Length" mean here?
The record doesn't define it beyond the words. Check the photos or call 877-752-3811.
How wide is it?
7.625", molding to door bottom.
How many pieces?
Ten.
