Product Description
Infiniti Q45 1990-1996 Two-Piece Stainless Pillar Covers (PP92040)
PP92040 is a two-piece pillar trim set for the Infiniti Q45 sedan. QAA lists it for the 4-door Q45 in model years 1990 through 1996, and both pieces are mirror-polished 304 stainless steel made in the USA.
Two pieces on a 4-door
A two-piece count on a 4-door sedan is worth a careful look. The data has no coverage note that says which posts these two Q45 covers dress. Before ordering, compare the product photos with your car, and call if you want us to confirm what the set includes.
Pair with rocker trim
QAA links two Q45 rocker panel kits to this pillar set:
- TH92040: six-piece kit, coverage between the wheel wells only, spanning from the bottom of the molding to the bottom of the door
- TH92042: ten-piece full-length kit, also spanning from the bottom of the molding to the bottom of the door
Each is sold separately. Check their listings for the finish if you want the side of the sedan to look consistent with the pillars.
Years
1990, 1991, 1992, 1993, 1994, 1995, and 1996 Infiniti Q45, 4-door sedan. The Fitment tab shows the record.
Material and finish
26-gauge 304 stainless steel, polished to a mirror. Because there is no plating, the finish cannot peel away.
Mounting
Both Q45 covers install over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime and leave the Infiniti unmarked.
Preparing the surface
After decades of ownership, pillar paint can carry heavy wax or show wear. Wash, dry, and wipe each pillar with a wax-free cleaner. Repair any lifting paint before installation so the tape has a firm base.
Installation
On a dry, mild day, dry-fit the first cover with its liner on and compare it with the photos. When it sits right, peel and press firmly along the full length. Place the second the same way as the first, using fixed points like the door edge as a guide. Wait a few days before washing. The Installation tab has full detail.
Why polished pillars
A bright cover over a pillar gives the side glass a crisp edge and leaves the original surface underneath untouched. On an older sedan that is being kept in good shape, it is an easy cosmetic detail that takes an afternoon and no special tools.
Getting the pair to match
With just two pieces, the eye compares them immediately. Place the first cover, step back and look at it from the front and rear, and only then press it firmly. Use the same reference points for the second cover. Keep fingertips off the adhesive once a liner is removed.
Care
Mild soap, a thorough rinse, and a soft towel. Abrasive pads and compounds can haze the mirror face, so leave them out.
Before ordering
Confirm your model year, and if the two-piece count raises any question, call us first.
Part details
Q45 pillar pair PP92040 (UPC 691821650057): phone Quality Automotive Trims, 877-752-3811.
PP92040 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP92040 |
| UPC | 691821650057 |
| Part type | Pillar Post Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1996 Infiniti Q45 |
Fitment: PP92040
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti Q45 | 1990-1996 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1996 Infiniti Q45
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP92040 Pillar Post Trim
What does PP92040 fit?
The 4-door Infiniti Q45 sedan, 1990-1996.
Why only two pieces?
The catalog lists two pieces for this kit but has no coverage note. Please check the photos or call us to confirm what is included.
Are there matching rocker kits?
Yes, TH92040 (six pieces, between the wheel wells) and TH92042 (ten pieces, full length).
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made of?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
Who do I call?
Quality Automotive Trims, 877-752-3811.
