Product Description
Honda Accord Sedan 1990-1993 Full Length Upper Kit TH92285, 5", 10 Pieces
For the 1990-1993 Honda Accord 4-door sedan, TH92285 is the Full Length Upper Kit: ten polished stainless steel pieces, 5" tall from the molding down. The bullet reads "5" Width, Full Length, Includes coverage from the Wheel Well to the bumper, front and rear."
Eight or ten pieces
The sedan's other 5" Upper Kit, TH90281, has eight pieces and covers between the wheel wells only. This kit has two more and reaches out to the bumpers at both ends. The record doesn't say how the ten divide between the doors and the end sections.
Same count as the coupe
The coupe's Full Length kit, TH92255, also has ten pieces, even though the coupe's between-the-wheel-wells kit has six and the sedan's has eight. The record doesn't explain that pattern. The two Full Length kits are tagged for different bodies, so order the one for your car.
Sedan listings
- TH92285: Upper Kit, 5", Full Length, 10 pieces (this kit)
- TH90281: Upper Kit, 5", between the wheel wells only, 8 pieces
- TH90282: Full Kit, molding to door bottom, 9.25", 8 pieces
- PP90281: Pillar Post Trim, 4 pieces
Construction
The full-length 1990-1993 Accord sedan kit is ten 5" pieces of polished 26 gauge 304 stainless from a USA shop, carried wheel well to bumper on 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime with no harm to the Honda.
Preview the full run
Mark 5" below the molding with masking tape from bumper to bumper, across all the doors. Check it near the wheel wells and at each end. A photo to 877-752-3811 settles any doubt.
Molding
Because the top edge follows the molding the whole way, the molding must be secure from end to end. Fix any loose or cracked section first.
Prep
Wash and rinse the full length below the molding. Strip wax and polish, paying attention to the wheel well edges. Repair chips or rust, then wipe everything with isopropyl alcohol just before fitting.
Laying out
Sort the ten pieces in order from front to back, using the photos. Label each liner.
Fitting
- Dry-fit the pieces on the Accord doors first.
- Fit the end sections toward each bumper.
- Open the Accord's four doors to check clearance.
- Bond them with short liner peels and firm pressure.
Accord pieces past the doors
Measure one joint gap and hold every other joint to the same figure.
Conditions
Allow plenty of time; work on a mild, dry day in shade, and wait a day before washing.
Deciding on length
Run the masking tape along the doors first and look at it; that is roughly what the eight-piece kit gives. Then extend the tape to each bumper and look again. Both kits share the 5" height, so the only question is whether you want the line to stop at the wheel wells or carry on to the ends of the car.
Check each piece from the front and rear of the car before you move on.
Accord full-length kit TH92285, UPC 691821675418. Quality Automotive Trims, 877-752-3811, with your year.
TH92285 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92285 |
| UPC | 691821675418 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Full Length, Includes coverage from the Wheel Well to the bumper, front and rear; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1993 Honda Accord |
Fitment: TH92285
| Vehicle | Years | Body style |
|---|---|---|
| Honda Accord | 1990-1993 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1993 Honda Accord
- PP90281: 4-piece Pillar Post Trim
- TH90251: 6-piece Rocker Panel Trim, Upper Kit
- TH90252: 6-piece Rocker Panel Trim, Full Kit
- TH90281: 8-piece Rocker Panel Trim, Upper Kit
- TH90282: 8-piece Rocker Panel Trim, Full Kit
- TH92255: 10-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92285 Rocker Panel Trim, Upper Kit
Which Accord does TH92285 fit?
The 1990-1993 Honda Accord 4-door sedan.
How far does it reach?
From the wheel well to the bumper, front and rear, per the note.
How wide is it?
5", from the bottom of the molding down.
How many pieces?
Ten.
