Product Description
TH92255 Honda Accord Coupe 1990-1993 Full Length Upper Rocker Kit, 5", 10 Pieces
TH92255 is a ten-piece polished stainless steel Upper Kit for the 1990-1993 Honda Accord 2-door coupe. Its bullet reads "5" Width, Full Length, Includes coverage from the Wheel Well to the bumper, front and rear," and the pieces span "from the bottom of the molding DOWN to the specified width."
Full Length on the coupe
The coupe has two 5" Upper Kits. TH90251, with six pieces, covers between the wheel wells only. This kit has ten pieces and its note extends the coverage from the wheel well to the bumper at both the front and the rear. Height is identical; the difference is how far along the car the line runs.
All the coupe rocker listings
- TH92255: Upper Kit, 5", Full Length, 10 pieces (this kit)
- TH90251: Upper Kit, 5", between the wheel wells only, 6 pieces
- TH90252: Full Kit, molding to door bottom, 9.125", 6 pieces
There is a separate set for the sedan (TH90281, TH90282 and TH92285), and the linked PP90281 pillar trim is tagged sedan only.
Sorting ten pieces
The record doesn't list positions. With coverage running out to both bumpers, labelling matters: lay everything out from front bumper to rear bumper, compare with the photos, and mark each liner before peeling.
Material
The ten full-length Accord coupe pieces are USA-made polished 26 gauge 304 stainless on 3M automotive-grade acrylic foam tape. According to QAA, it will hold for a lifetime without harming the Honda.
Checking the line end to end
Mark 5" below the molding with masking tape from the front bumper to the rear bumper. Look at the full length, especially near the wheel wells and bumpers. If the tape runs off the panel anywhere, call 877-752-3811 with a photo.
Molding along the whole side
Every piece's top edge meets the molding, so it must be secure everywhere you'll cover, not just on the doors. Repair loose sections first.
Prep from bumper to bumper
- Wash and rinse the full length below the molding.
- Strip wax from the Accord with a wax-and-grease remover.
- Clean carefully at the wheel well edges, where grime collects.
- Fix chips or rust; wipe with isopropyl alcohol last.
Fitting order
Start with the door pieces so the door gaps are right, then work outward to each bumper. Open both doors before bonding. Peel liners in short sections and press firmly.
Working rearward
Keep the Accord gaps even on all ten pieces, including at the wheel wells.
Timing
A longer kit takes longer to fit, so start early on a mild, dry day in shade, and don't wash the car for a day.
Choosing between the two Upper Kits
If you only want the line along the doors and the panel between the wheel wells, the six-piece kit does that. If you want it to carry on past the wheel wells to the bumpers, this is the one. Because both are 5" from the molding, you could look at the masking tape line along the doors first, then extend it to the bumpers and decide which length you prefer.
Have your Accord year ready for Quality Automotive Trims at 877-752-3811. SKU TH92255, UPC 691821337118.
TH92255 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92255 |
| UPC | 691821337118 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Full Length, Includes coverage from the Wheel Well to the bumper, front and rear; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1993 Honda Accord |
Fitment: TH92255
| Vehicle | Years | Body style |
|---|---|---|
| Honda Accord | 1990-1993 | 2-door, Coupe |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1993 Honda Accord
- PP90281: 4-piece Pillar Post Trim
- TH90251: 6-piece Rocker Panel Trim, Upper Kit
- TH90252: 6-piece Rocker Panel Trim, Full Kit
- TH90281: 8-piece Rocker Panel Trim, Upper Kit
- TH90282: 8-piece Rocker Panel Trim, Full Kit
- TH92285: 10-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92255 Rocker Panel Trim, Upper Kit
Which Accord does TH92255 fit?
The 1990-1993 Honda Accord 2-door coupe.
How far does it reach?
From the wheel well to the bumper, front and rear, per the note.
How wide is it?
5", from the bottom of the molding down.
How many pieces?
Ten.
