Product Description
Honda Accord 4-Door Sedan 1990-1993 Full Kit TH90282, 9.25" Stainless Rocker Trim, 8 Pieces
On the 1990-1993 Honda Accord sedan, TH90282 covers the lower doors with eight polished stainless pieces. This Full Kit runs from the molding's bottom edge to the door's bottom edge, a listed 9.25" of height.
Full height on the sedan
This is the sedan kit that fills the whole space between the molding and the door bottom. The two sedan Upper Kits stop 5" below the molding: TH90281 between the wheel wells with eight pieces, and TH92285 "Full Length" to the bumpers with ten.
Coupe vs sedan Full Kit
The coupe Full Kit, TH90252, is listed at 9.125" with six pieces. This sedan kit is 9.25" with eight. The figures are close but not the same, so order by body style, not by appearance.
Measuring
- Molding to door bottom, top to bottom on the Accord
- Front and rear, across all four sedan doors
- Compared with 9.25"
If any door reads noticeably different, call 877-752-3811 before ordering, especially if a door or molding has been replaced.
Pillar trim
For the sedan's pillars, QAA links PP90281: four Pillar Post Trim pieces listed for the 4-door Accord.
Steel and tape
Every Accord piece is polished 26 gauge 304 stainless steel made in the USA, applied on top of the current finish with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime, with no damage to the car's surface.
Preparing a tall band
With over nine inches of height per piece, clean the whole area thoroughly. Wash, strip wax and polish with a wax-and-grease remover, repair chips or rust, and finish with isopropyl alcohol just before fitting.
Eight pieces
The record doesn't say how they divide among the doors. Sort them with the photos and label each liner.
Trial fit
Tape each piece up with painter's tape, top on the molding and bottom on the door edge. Open each door.
Bonding
Peel a short section, press across the full height, and continue to the end.
Rest of the kit
Match the gaps you set on the first pieces.
Conditions
A mild, dry day in shade, and no washing for a day.
Ordering
Send the year, confirm the sedan, and include your measurement. Keep the box until every piece is on.
If the molding is loose
The Full Kit lines up with the molding along its top edge, so the molding needs to be straight and secure on all four doors. If it is lifting, cracked or missing anywhere, repair it first. The sedan Upper Kits start at the molding too, so they need it in good shape as well.
One door first
Fit a single door, step back and look along the side, then go on to the next. It is much easier to correct a piece before the liner comes off.
Hang on to the carton and liners till the eighth piece is on.
Leave every liner in place until the whole Accord kit passes the taped dry fit.
Accord sedan Full Kit TH90282, UPC 691821464883. Phone QAA at 877-752-3811.
TH90282 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90282 |
| UPC | 691821464883 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 9.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1993 Honda Accord |
Fitment: TH90282
| Vehicle | Years | Body style |
|---|---|---|
| Honda Accord | 1990-1993 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1993 Honda Accord
- PP90281: 4-piece Pillar Post Trim
- TH90251: 6-piece Rocker Panel Trim, Upper Kit
- TH90252: 6-piece Rocker Panel Trim, Full Kit
- TH90281: 8-piece Rocker Panel Trim, Upper Kit
- TH92255: 10-piece Rocker Panel Trim, Upper Kit
- TH92285: 10-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90282 Rocker Panel Trim, Full Kit
Which Accord does TH90282 fit?
The 1990-1993 Honda Accord 4-door sedan.
Where does it install?
From the bottom of the molding to the bottom of the door.
How wide is it?
9.25".
How many pieces?
Eight.
