Product Description
TH90775 Mazda Miata 1990-1997 Convertible Full Rocker Kit, 8.25", 6 Pieces
For the 1990-1997 Mazda Miata 2-door convertible, TH90775 is a six-piece Full Kit in polished stainless steel. The listed width is 8.25", and the kit "Spans from the bottom of the molding to the bottom of the door."
Eight model years, one listing
The single fitment row covers 1990 through 1997 with one width and one piece count. There are no linked siblings, so the record doesn't offer an Upper or Lower Kit alternative for the Miata. Call 877-752-3811 if you want to ask about other options.
A deep band
At 8.25", each piece covers a lot of height between the molding and the door bottom. Take your measurement carefully, straight down from the molding's lower edge to the bottom of the door, near the front and the rear of each door. If your readings and 8.25" don't agree, send them to us with a photo before ordering.
Six pieces on two doors
The record doesn't say how the six divide between the doors and the panels around them. Lay the pieces out on a soft towel, match them to the photos, and label each liner.
Material
On the 1990-1997 Miata, six 8.25" strips of USA-made polished 26 gauge 304 stainless are pressed on between molding and door bottom using 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime and leaves the convertible unharmed.
Preparing a wide area
So much paint sits under each piece that partial cleaning won't do. Work through the whole band:
- Soap, water and a good rinse
- Wax-and-grease remover over every inch the tape will touch
- Touch-up for any chips or rust, fully cured
- An isopropyl alcohol wipe on the Miata just before fitting
Molding
Each piece's top edge meets the molding, so the molding on both doors needs to be straight and firmly attached. Fix any section that is lifting before you begin.
Fitting sequence
- Dry fit with painter's tape: top on the molding, bottom on the door edge.
- Open each door fully.
- Peel a few inches of liner, press across the full height, and continue.
- Go over the finished piece with firm pressure.
Telling them apart
Keep the Miata spacing even on all six pieces.
Top down?
It doesn't matter for the trim whether the roof is up or down, but working with it up keeps dust and leaves out of the cabin while the doors are open.
Conditions
A mild, dry day in shade. Leave it a day before washing.
Ordering
Give us the year and your measurement. Keep the box and liners until every piece is on.
If a door reads differently
If one door gives a reading that doesn't match the other, check whether it or its molding has been replaced, and send us both figures. Don't force a piece into a space it doesn't fit.
Fit one door first, then step back and check.
Keep each liner on until both doors have been dry fitted.
Six Miata pieces at 8.25 inches: TH90775, UPC 691821588701. Ask Quality Automotive Trims at 877-752-3811.
TH90775 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90775 |
| UPC | 691821588701 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1997 Mazda Miata |
Fitment: TH90775
| Vehicle | Years | Body style |
|---|---|---|
| Mazda Miata | 1990-1997 | 2-door, Convertible |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90775 Rocker Panel Trim, Full Kit
Which Miata does TH90775 fit?
The 1990-1997 Mazda Miata 2-door convertible.
Where does it install?
From the bottom of the molding to the bottom of the door.
How wide is it?
8.25".
How many pieces?
Six.
