Product Description
Mazda 626 1993-1997 Sedan Upper Kit TH93755, 4.875", Between the Wheel Wells, 6 Pieces
TH93755 is a six-piece polished stainless steel Upper Kit for the 1993-1997 Mazda 626 4-door sedan. The bullet reads "4.875" Width, Includes coverage between the wheel wells only," and it spans "from the bottom of the molding DOWN to the specified width."
Height and length, set by the notes
From the top: the trim starts at the molding's lower edge. Downward: it stops 4.875" below. Along the car: it runs between the front and rear wheel wells and no further. Those three facts are what the record gives you.
Pillar sets for the 626
- PP96750: Pillar Post Trim, 4 pieces
- PP96751: Pillar Post Trim, 6 pieces
Both are tagged for the 626 sedan. The record doesn't say how they differ beyond the count; ask us if you want one with this kit.
Picture the line first
Measure 4.875" (just under five inches) down from the molding at each end of every door, and stretch masking tape between the marks. Stand back. That's where the lower edge will sit. Call 877-752-3811 with a photo if the tape runs past the door bottom anywhere.
Six pieces on four doors
The record doesn't list positions, and six doesn't split evenly. Sort them with the photos and mark each liner.
The steel and the tape
QAA builds the 1993-1997 Mazda 626 kit from six pieces of polished 26 gauge 304 stainless steel made in the USA, set between the wheel wells under the molding with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without damage.
Molding comes first
An Upper Kit starts at the molding. If the molding is cracked, lifting or missing anywhere, repair it before you begin.
Prep
Soapy wash, rinse and dry. Wax-and-grease remover over the band. Touch-up where needed. Isopropyl alcohol wipe last.
Placement and bonding
Dry fit each piece with painter's tape, top edge tucked under the molding, and check the ends near the wheel wells and door gaps. Open all four doors. Then peel the liner a section at a time and press.
Checking each piece's shape
Keep the 626 gaps even on every piece.
Timing
Fit the 626 trim mild, dry and shaded, with no washing for a day.
If a door has been replaced
Because the lower edge follows the molding, a replaced door or refitted molding needs checking on its own. Measure it separately and mention it when you call.
Sorting and handling
Lay the six pieces on a soft towel while sorting so the polished faces stay unmarked, and keep every liner on until the whole set has been dry fitted. Fit one door first and look along the side before carrying on.
Tools to gather
Tape measure, painter's tape for the dry fit, masking tape for marking the line, clean microfiber cloths, a wax-and-grease remover and isopropyl alcohol. Having everything to hand before you start keeps the panels from collecting dust between cleaning and fitting.
Mazda 626 1993-1997: part TH93755, UPC 691821671731. Give Quality Automotive Trims your year at 877-752-3811.
TH93755 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH93755 |
| UPC | 691821671731 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.875" |
| Coverage / notes | Includes coverage between the wheel wells only; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1997 Mazda 626 |
Fitment: TH93755
| Vehicle | Years | Body style |
|---|---|---|
| Mazda 626 | 1993-1997 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-1997 Mazda 626
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH93755 Rocker Panel Trim, Upper Kit
Which 626 does TH93755 fit?
The 1993-1997 Mazda 626 4-door sedan.
Does it reach the bumpers?
No, coverage is between the wheel wells only.
How wide is it?
4.875", from the bottom of the molding down.
Are there pillar sets?
PP96750 (4 pieces) & PP96751 (6 pieces) are linked.
