Product Description
Mazda B 1994-1997 Extra Cab Short Bed Full Kit TH94720, 8.25", 10 Pieces
TH94720 is a ten-piece polished stainless steel Full Kit for the 1994-1997 Mazda B pickup, tagged "Extra Cab, Short Bed." The pieces span "from the bottom of the molding to the bottom of the door," with a listed width of 8.25".
Extra Cab named
This is the Mazda B listing that names the Extra Cab. Its linked partner, TH94710, carries only the "Short Bed" tag, with the same width and the same ten-piece count. The record gives no other difference. If you have an Extra Cab with the short bed, this listing's tag describes your truck; if you have a different cab, call 877-752-3811 before ordering either kit.
A tall band
8.25" from the molding down to the door bottom is a lot of panel. Measure it at the front and rear of each door with a rigid ruler, and send the readings if they differ from the listing.
Sorting ten pieces
- Lay them out on a towel
- Order them front to back using the photos
- Mark each Mazda liner with its position
- If a piece won't place, set it aside and call
Construction
The ten Mazda B Extra Cab short bed pieces are polished 26 gauge 304 stainless steel from the USA, bonded between molding and door bottom with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without harming the pickup.
Cleaning
Hose off loose dirt, then wash and rinse. Strip old wax across the whole band with a wax-and-grease remover. Touch up chips or rust, and finish with isopropyl alcohol just before the pieces go on.
Molding
The top edge of each piece sits against the molding, so it must be straight and firmly attached everywhere the pieces go. Repair loose sections first.
Dry fit
Use painter's tape to hold each piece between the molding and the door bottom. Check both edges and open each door.
Pressing on
Peel a short length of liner, press across the full height, and continue. Go back over the whole piece with firm pressure.
Spacing the B-Series trim
Keep the gaps between Mazda pieces uniform.
When to do it
Shade and mild, dry weather; the Mazda stays unwashed for a day.
If you are unsure of your cab
If you bought the truck secondhand and aren't certain which cab it is, send us a photo of the whole side, or read us the details from the paperwork. We can confirm it before you order, which is much easier than sorting out a return.
One door at a time
Finish one door, step back to check the line from the front and rear, and then carry on. Lay the pieces on a soft towel while sorting so the polished faces stay unmarked.
Keep every liner on until the whole kit has been dry fitted and the layout matches the photos.
Mention any replaced door or molding when you call.
Ten-piece Mazda B set TH94720, UPC 691821489602: call 877-752-3811 with cab and bed, Quality Automotive Trims.
TH94720 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH94720 |
| UPC | 691821489602 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1994-1997 Mazda B |
Fitment: TH94720
| Vehicle | Years | Body style |
|---|---|---|
| Mazda B | 1994-1997 | Extra Cab, Short Bed |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1994-1997 Mazda B
- TH94710: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH94720 Rocker Panel Trim, Full Kit
Which Mazda B does TH94720 fit?
The 1994-1997 Mazda B Extra Cab with the short bed.
How is it different from TH94710?
TH94710 is tagged Short Bed only; the record gives no other difference.
How wide is it?
8.25".
How many pieces?
Ten.
