Product Description
Mazda MX-6 1988-1992 Coupe Upper Rocker Kit TH90760, 5.75", 6 Pieces
For the 1988-1992 Mazda MX-6 2-door coupe, TH90760 is a six-piece Upper Kit in polished stainless steel. It "Spans from the bottom of the molding DOWN to the specified width," and the record lists 5.75".
The short version
Six pieces, a 5.75" band starting at the molding, one body style, and no linked parts. The record gives no length note, so it doesn't say whether the coverage stops at the wheel wells. The photos show the layout; call 877-752-3811 if you need it confirmed.
Where the lower edge lands
Because an Upper Kit is measured from the molding, the lower edge sits 5.75" below the molding wherever the molding is. Check the measurement at several points along each door. If 5.75" below the molding takes you past the door bottom anywhere, send us a photo.
Construction
Mazda's 1988-1992 MX-6 coupe gets six 5.75" strips that QAA cuts in the USA from polished 26 gauge 304 stainless, secured below the molding with 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime and won't mark the car.
Three things to check first
- The molding is present and secure along both doors, since every piece's top edge sits against it.
- The paint in the 5.75" band is sound, with no lifting, flaking or rust.
- You have the MX-6 pieces sorted with the photos.
Cleaning
Wash with soapy water and rinse. Take off old wax and polish with a wax-and-grease remover, working right up to the molding. Just before fitting, wipe with isopropyl alcohol and let it flash off.
Dry fit, then bond
Tape each piece in place with painter's tape and open both doors. Look along the side from the front and rear. Once the line is straight, peel the liner a few inches at a time, pressing as you go, and finish with firm pressure.
The later pieces
Measure the gaps on the side you've finished and use the same spacing on the other.
Weather and care
Choose a mild, dry day and a shaded spot. After fitting, wait a day before washing the car.
Six pieces
The record doesn't say how the six divide between the doors and any panels beyond them. Label each liner as you sort them.
Before you order
Tell us the year and your molding-to-door-bottom measurement. Keep the box and liners until the work is done.
Choosing the right day
Tape grips best when the panel is warm to the touch but not hot. If the car has been parked outside on a cold morning, let it sit in the sun or a warm garage for a while before you start, then move it into shade for the work itself.
If the molding has been replaced
If the molding on your car has been replaced or refitted, measure both doors at the front and rear and send us all four figures before ordering, so we can check them against the 5.75" listing.
MX-6 kit TH90760 has UPC 691821397228. Dial Quality Automotive Trims at 877-752-3811.
TH90760 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90760 |
| UPC | 691821397228 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.75" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1988-1992 Mazda MX-6 |
Fitment: TH90760
| Vehicle | Years | Body style |
|---|---|---|
| Mazda MX-6 | 1988-1992 | 2-door, Coupe |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90760 Rocker Panel Trim, Upper Kit
Which MX-6 does TH90760 fit?
The 1988-1992 Mazda MX-6 2-door coupe.
Where does it install?
From the bottom of the molding down 5.75".
Does it reach the bumpers?
The record doesn't say. Check the photos or call 877-752-3811.
How many pieces?
Six.
