Product Description
Infiniti M30 1992-1994 Coupe & Convertible Full Kit TH92035, 3.75", Between the Wheel Wells, 6 Pieces
TH92035 is a six-piece polished stainless steel Full Kit for the 1992-1994 Infiniti M30, tagged "2-door, Coupe, Convertible." The bullet reads "3.75" Width, Includes coverage between the wheel wells only," and it "Spans from the bottom of the molding to the bottom of the door." Its note says the coverage is between the wheel wells only, on the M30 coupe and convertible.
Two M30 kits
QAA links a second M30 Full Kit, TH92036, with the same 3.75" width and the same fitment, but ten pieces. Its listing has no "between the wheel wells" note. The record doesn't state what the four further pieces cover, so if you're deciding between the two, call 877-752-3811.
- TH92035: 6 pieces, between the wheel wells only (this kit)
- TH92036: 10 pieces, no length note
Between the wheel wells
This kit's coverage stops at the front and rear wheel wells. If you want the trim to continue beyond them, this isn't the listing for that.
A slim Full Kit
At 3.75", the space between the molding and the door bottom is narrow, so small differences in your measurement matter. Measure at the front and rear of both doors and compare each with 3.75".
Coupe or convertible
Both body styles share this fitment row and piece count. Tell us which you have when you call.
Material
Each of the six M30 coupe and convertible pieces starts as polished 26 gauge 304 stainless steel in the USA and bonds between the wheel wells with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without damaging the Infiniti.
Prep
Wash the band below the molding and rinse. Strip wax with a wax-and-grease remover, repair any chips or rust, and wipe with isopropyl alcohol just before fitting. Check the molding is straight and secure along both doors.
Six pieces
Positions aren't listed. Match each piece to the photos and label its liner.
Fitting
- Dry fit with painter's tape between the molding and the door bottom.
- Check the ends near the wheel wells.
- Open both doors.
- Bond the M30 pieces with short peels of liner and firm pressure.
M30 pieces four through six
Keep the M30 spacing even.
Conditions
A mild, dry day in shade; on the convertible, keep the top up to keep dust out of the cabin. No washing for a day.
If a reading is off
With a band this narrow, a reading that is a quarter-inch off on one door is worth a call before you order. Check whether that door or its molding has been replaced, and send us each figure separately.
One door at a time
Fit one door completely, then step back and look along the side from the front and rear before going on to the other. Adjusting is easy while the liner is still on.
Hold on to the box and liners until the last M30 piece is fitted.
Photograph the M30 before starting so you can compare the finished line.
M30 set TH92035 goes by UPC 691821577774, and Quality Automotive Trims answers fit questions at 877-752-3811.
TH92035 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92035 |
| UPC | 691821577774 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 3.75" |
| Coverage / notes | Includes coverage between the wheel wells only; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1994 Infiniti M30 |
Fitment: TH92035
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti M30 | 1992-1994 | 2-door, Coupe, Convertible |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1994 Infiniti M30
- TH92036: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92035 Rocker Panel Trim, Full Kit
Which M30 does TH92035 fit?
The 1992-1994 Infiniti M30, coupe or convertible.
How is it different from TH92036?
TH92036 has 10 pieces and no "between the wheel wells" note. Call 877-752-3811 to compare.
How wide is it?
3.75", molding to door bottom.
How many pieces?
Six.
