Product Description
QAA AT13575: Upper Side Molding Accent Trim for the 2013-2019 Nissan Sentra Sedan
The Nissan Sentra sedan stayed in the QAA catalog for this kit from 2013 all the way through 2019, a seven-year span. AT13575 is the upper body side molding accent for that car: four strips of polished stainless steel, 1" wide, that run along the upper part of the side molding area on the doors. QAA's own fitment note reads "Upper - 1" wide," and that is the best short description of what the kit does.
Why the "upper" note matters
Side accents can sit in different places on a door. QAA labels this one as an upper fitment, so it is meant for the higher line of the side molding area rather than down near the rocker. The catalog does not give the length of each strip, and we will not invent one. Look at the listing photos to see where the four pieces land on a Sentra, and call if you want us to look at it with you.
Material you can see
Each strip is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. Because the brightness is the metal and not a plated coating, it pairs naturally with any chrome already on the car. 304 is one of the most common grades of stainless, and 26 gauge describes the sheet it is cut from.
Mounting in a nutshell
The back of every piece carries 3M automotive-grade acrylic foam tape, applied at the factory. The trim goes directly over the existing door surface, so you will not drill or remove anything from the Sentra. QAA states the tape will hold for a lifetime without causing any damage to the surface. Clean and dry the doors, position each strip, then press it down along its whole length. The Installation tab has the full checklist.
Building out the Sentra
QAA catalogs several companion pieces for the same 2013-2019 Sentra. Pillar post kits come in four, six, and eight pieces, and the eight-piece PP13577 includes the rear triangle piece. There is a gas door cover, GC13575, and two window trim packages. WP13575 is a 12-piece package with the upper trim and pillar posts but no window sills. WP13576 is upper trim only, and QAA notes it only works with QAA's pillar post kit. Plan the window trim and the side accent together, and check each listing for its finish before ordering. The Fitment tab links each part.
Years and body style
Listed years are 2013, 2014, 2015, 2016, 2017, 2018, and 2019, and the body style is the 4-door sedan. The Fitment tab shows the catalog row exactly as QAA wrote it. Seven years is a long run for a single trim kit, which also means you can buy with confidence if you own an older Sentra from early in that range or a newer one from the end of it.
Need a hand?
Call Quality Automotive Trims at 877-752-3811 with your model year and we will confirm the fit. Part number AT13575, the UPC, and the full material and mounting details are in the Specs tab.
AT13575 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT13575 |
| UPC | 691821546695 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1" |
| Coverage / notes | Upper - 1" wide |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2019 Nissan Sentra |
Fitment: AT13575
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Sentra | 2013-2019 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2019 Nissan Sentra
- GC13575: 1-piece Gas Door Cover Trim
- PP13575: 4-piece Pillar Post Trim
- PP13576: 6-piece Pillar Post Trim
- PP13577: 8-piece Pillar Post Trim
- WP13575: 12-piece Window Trim Package
- WP13576: 4-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT13575 Body Side Molding Accent Trim
What Sentra does AT13575 fit?
The 2013 through 2019 Nissan Sentra, 4-door sedan.
Where on the door does it go?
QAA lists it as the upper side molding accent, 1" wide. The photos show the placement of all four strips.
Is it stainless or chrome-plated plastic?
Polished 26-gauge 304 stainless steel, made in the USA.
Does it need drilling?
No. The 3M acrylic foam tape is already applied and the trim installs over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
Does the WP13576 window trim need anything else?
QAA notes that WP13576 only works with QAA's pillar post kit, so pair it with one of the Sentra pillar post kits.
Who do I call with fitment questions?
Quality Automotive Trims, 877-752-3811.
