Product Description
2013-2015 Nissan Sentra Tapered Lower Door Kit, 1.75" to 3.125", 4 Pieces (TH13576)
TH13576 is the door-mounted member of the Sentra's rocker panel family. It's a four-piece Lower Kit for the 2013, 2014 and 2015 Nissan Sentra sedan, with a "1.75" - 3.125" tapered Width." The note places it "On the doors only, spans from the bottom of the door UP to the specified width." The taper means the pieces grow by well over an inch from one end to the other.
Choosing among three Sentra kits
The other two linked Sentra rocker kits both install below the door, on the rocker: TH13575 at six pieces and 2.625", and TH13577 at two pieces and 1.25". TH13576 is the only one of the three that goes on the doors. That means it can be combined with either rocker kit for two separate bands of steel, or used alone.
The taper
From 1.75" to 3.125" is a pronounced change. The listing doesn't say which end is wider. Look at the photos and hold every piece up to its door before you peel any liner, so the top edge runs the way it's meant to across the doors.
Material and adhesive
The four Sentra door pieces are polished 26 gauge 304 stainless steel from a USA shop, mounted directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA says it will hold for a lifetime and won't mark the Nissan.
Cleaning for a wide piece
Because the widest section is over three inches, clean at least the bottom four inches of each door. Wash and dry, then wipe with isopropyl alcohol. Repair any chips in that area before installing.
Matching doors
Four pieces, four doors; the listing doesn't label which is which. Sort them by length and taper direction, and mark each with painter's tape.
Install
Seat the lower edge of a piece on the bottom of its door with the liner on. Close the door slowly to check clearance. Step back and compare the top line with the piece on the neighboring door. When the line flows across the gap, peel in short sections and press firmly over the full width.
Wheel well kits
The Sentra sheet lists WQ13575, "Cut to fit with Rocker kit sold separately," and WQ13576, "Full Length." The record doesn't say which rocker kit the cut-to-fit version is meant for, so ask before combining.
What to have on hand
Soapy water, isopropyl alcohol, several lint-free cloths, painter's tape for labeling and marking, and a ruler to check the narrow and wide ends against the doors. It mounts with 3M automotive-grade acrylic foam tape.
Conditions
Warm and dry, or in a garage. Wait about a day before washing, and avoid deep puddles.
Other linked parts
RD13575 deck accent w2 and LP13575 plate bezel. Check each listing for its finish.
Care
Rinse the lower doors after salty or muddy drives and wash with a mild soap. A non-abrasive polish keeps the broad surface bright.
Nissan Sentra 2013-2015 part TH13576 (UPC 691821300785). Talk to Quality Automotive Trims on 877-752-3811.
TH13576 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH13576 |
| UPC | 691821300785 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.75" to 3.125" tapered |
| Coverage / notes | On the doors only, spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2015 Nissan Sentra |
Fitment: TH13576
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Sentra | 2013-2015 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2015 Nissan Sentra
- LP13575: 1-piece License Plate Bezel
- RD13575: 1-piece Rear Deck Accent
- TH13575: 6-piece Rocker Panel Trim, On the rocker
- TH13577: 2-piece Rocker Panel Trim, On the rocker
- WQ13575: 4-piece Wheel Well Accent Trim
- WQ13576: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH13576 Rocker Panel Trim, Lower Kit
Where does TH13576 go?
On the doors only, from the bottom of each door up to the specified width.
How wide is it?
It tapers from 1.75" to 3.125".
Can I use it with TH13575 or TH13577?
Those install below the door, on the rocker, so they're a different location.
Which years fit?
2013 through 2015 Nissan Sentra sedan.
Which end is wider?
The record doesn't say. Check the photos or call 877-752-3811.
