Product Description
Nissan Sentra 2013-2015 Stainless Wheel Well Accent Trim WQ13575, Cut to Fit with Rocker Kit, 4 Pieces
WQ13575 is a four-piece polished stainless steel Wheel Well Accent Trim for the 2013-2015 Nissan Sentra 4-door sedan, with a specific note: "Cut to fit with Rocker kit sold separately". The listing also describes it as "With 3M adhesive installation and black rubber gasket edging".
Two Sentra wheel well sets
This Sentra has two wheel well listings. This one is cut to work with a rocker kit. The other, WQ13576, is noted "Full Length". The note here doesn't name the rocker kit it's cut for, and three rocker parts are listed for this car: TH13575, a six-piece On the rocker kit at 2.625"; TH13576, a four-piece lower kit at 1.75-3.125" on the doors only; and TH13577, a two-piece On the rocker strip at 1.25". Before ordering, call 877-752-3811 to confirm which rocker kit this set is cut to meet. If you aren't fitting a rocker kit, the Full Length set is the one listed without that cut.
No width listed
The record gives four pieces with black rubber gasket edging but no width. The photos show how much stainless sits around each arch.
Material
On the 2013-2015 Sentra, four arch strips of USA-made polished 26 gauge 304 stainless are pressed on using 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime and the Nissan's paint stays unharmed.
Rocker kit first
Because these pieces are cut to meet a rocker kit, fit the rocker kit first and the arches second. That way each cut end can be checked against the rocker trim it's meant to sit beside before any arch tape is exposed.
Arch prep and fitting
Clean the openings well: wash, dry, then lift off any old adhesive, wax or loose paint from the band the trim will cover. Just before each piece, a wax-and-grease remover wipe and then isopropyl alcohol. Hold each piece up with its liner still on, with painter's tape at the ends, and look closely at two things: the gasket following the opening, and the cut end meeting the rocker trim. Only when both look right should the liner start to come off, an inch at a time, pressing as you go.
Other Sentra parts
A license plate bezel and a rear deck accent at 2" are linked as well.
Care
Wait a day before washing; then mild soap and a soft cloth, with no pressure washer on the gasket. If a cut end doesn't meet the rocker trim as the photos show, call 877-752-3811 before bonding.
Order of the Sentra jobs
A sensible running order for WQ13575 is: confirm the rocker kit with 877-752-3811, fit that kit, let it sit, then prep and fit the four arch pieces. Count all four pieces on arrival and keep the liners on until each cut end has been checked against the rocker trim beside it. Don't trim the stainless yourself; the cut is already made for the rocker kit.
For the 2013-2015 Sentra, our reference is WQ13575 and the barcode reads 691821582426 (UPC); 877-752-3811 reaches us.
WQ13575 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ13575 |
| UPC | 691821582426 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Cut to fit with Rocker kit sold separately |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2015 Nissan Sentra |
Fitment: WQ13575
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Sentra | 2013-2015 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2015 Nissan Sentra
- LP13575: 1-piece License Plate Bezel
- RD13575: 1-piece Rear Deck Accent
- TH13575: 6-piece Rocker Panel Trim, On the rocker
- TH13576: 4-piece Rocker Panel Trim, Lower Kit
- TH13577: 2-piece Rocker Panel Trim, On the rocker
- WQ13576: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ13575 Wheel Well Accent Trim
Which car does WQ13575 fit?
The 2013-2015 Nissan Sentra 4-door sedan.
Which rocker kit is it cut for?
The note doesn't say. Call 877-752-3811 before ordering.
Is there a version without the cut?
Yes, WQ13576, noted "Full Length".
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
