Product Description
2013-2015 Nissan Sentra Polished Stainless License Plate Bezel (LP13575)
If you want a little brightness at the back of a 2013, 2014 or 2015 Nissan Sentra without committing to a full trim package, LP13575 is a sensible place to start. It is a single License Plate Bezel cut from 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA. The fitment row lists the Sentra 4-door sedan for those three model years and nothing else, so if your records show a Sentra sedan in that window, you are looking at the right listing.
A bezel is simply a frame that outlines the plate area. Because it sits in one spot, the job is short. The catalog does not give dimensions for this part, and it doesn't list any cutouts, so the product photos are your best guide to the outline. Lay them next to your own plate area, paying attention to the lock, badges and any lighting nearby, and if anything looks different, phone Quality Automotive Trims at 877-752-3811 with the SKU LP13575 before you order.
How it goes on
The bezel mounts with 3M automotive-grade acrylic foam tape and goes directly over the existing surface, so there are no holes to drill and no factory parts to remove. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Take the plate off, wash the area with soapy water, rinse it, and let it dry fully. A wipe with rubbing alcohol removes wax and road film that soap leaves behind. Then hold the bezel up with the liner still on and stand back to check that the margins look even on every side. A couple of strips of painter's tape will hold that position while you peel the liner, set the frame against your marks and press firmly along its whole length. A second press a minute later helps the foam seat. Refit the plate afterward, and check the Installation tab for the temperature range the tape prefers.
Other Sentra pieces on this sheet
Six more parts are cataloged for the same sedan. RD13575 is a one-piece Rear Deck Accent at 2", and since it also lives at the back of the car, it's worth viewing its photos beside this bezel. For the lower body there are three rocker choices: TH13575, six pieces at 2.625" that Installs below the door; TH13577, two pieces at 1.25" in the same position; and TH13576, a four-piece lower kit that sits On the doors only and spans from the bottom of the door up to a width between 1.75" and 3.125". Two wheel well accent sets round it out. WQ13575 is noted Cut to fit with Rocker kit sold separately, while WQ13576 is listed as Full Length. Check each listing for its finish before you combine them.
If you run a separate frame on the plate, put it back on during the dry fit to see whether it overlaps the bezel. For care, mild soap, water and a soft towel are all the polished face needs.
LP13575 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP13575 |
| UPC | 641606029424 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2015 Nissan Sentra |
Fitment: LP13575
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Sentra | 2013-2015 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2015 Nissan Sentra
- RD13575: 1-piece Rear Deck Accent
- TH13575: 6-piece Rocker Panel Trim, On the rocker
- TH13576: 4-piece Rocker Panel Trim, Lower Kit
- TH13577: 2-piece Rocker Panel Trim, On the rocker
- WQ13575: 4-piece Wheel Well Accent Trim
- WQ13576: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP13575 License Plate Bezel
Which Sentra does LP13575 fit?
The 2013-2015 Nissan Sentra 4-door sedan, per the fitment row.
Do I need to drill anything?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What are the dimensions?
The catalog doesn't list them. Compare the product photos with your plate area or call 877-752-3811.
How many pieces are included?
One bezel.
Is there a matching piece for the trunk area?
RD13575 is a one-piece Rear Deck Accent for the same sedan. Check its listing for finish and photos.
