Product Description
Nissan Pathfinder 2013-2020 Stainless License Plate Bezel (LP13527)
LP13527 covers eight model years of the Nissan Pathfinder 4-door SUV, 2013 through 2020, with one polished stainless steel License Plate Bezel. The fitment row has no trim exclusions, so every Pathfinder 4-door SUV in that span is on it. It frames the plate area on the liftgate.
The details we have
One piece. 26-gauge 304 stainless steel with a mirror polish. Made in the USA. 3M automotive-grade acrylic foam tape, installed directly over the existing surface, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
The details we don't
No dimensions, and no notes about cutouts around lights, a handle or a camera. Over eight model years, it's worth a careful look at your own liftgate before ordering. The product photos show the bezel's outline; compare them with the plate area on your Pathfinder. If something doesn't match, call Quality Automotive Trims at 877-752-3811 and mention LP13527.
Installation
Take the plate off and keep the screws handy. Wash the plate area with soapy water, rinse, and dry it completely. Wipe with rubbing alcohol, including the corners, until a fresh cloth stays clean. Inspect for chips, lifting clear coat or old frame adhesive and fix those first. Hold the bezel in place, liner on, and check from behind the SUV that it's centered with even margins. A few strips of painter's tape mark the spot. Peel the liner, line up, and press firmly all around the frame. Give it a second pass, refit the plate, and avoid slamming the liftgate for the first day. The Installation tab covers temperature.
Related Pathfinder parts
Six other parts are listed for this Pathfinder. GC13527 is a one-piece gas door cover trim. MI13527 is a six-piece body molding insert kit at 0.75". PP13527, PP13528 and PP13529 are pillar post kits of four, six and eight pieces; the eight-piece Includes Rear Triangle piece. RD13527 is a one-piece stainless part cataloged as Rear Deck Accent at 1.25" wide, which also works at the back of the vehicle, so compare its photos with this bezel's if you're considering both. Check each listing for its finish.
Confirm the year
Your records will show a year between 2013 and 2020 if your Pathfinder is on this listing.
Plate frames
Using a separate frame on the plate? Refit it during the dry fit and make sure it doesn't overlap the bezel. Decide which look you prefer before you peel the liner.
Why start at the plate
The plate area is centered on the liftgate, so a polished frame there is visible from behind without changing anything else. It's a single piece and a contained job, which makes it a practical first step before the pillar or molding kits.
Care
Wash with mild soap and water and dry with a soft towel. Keep steel wool, scouring pads and gritty compounds away from the polished face, since they leave fine scratches.
LP13527 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP13527 |
| UPC | 691821635467 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2020 Nissan Pathfinder |
Fitment: LP13527
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Pathfinder | 2013-2020 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2020 Nissan Pathfinder
- GC13527: 1-piece Gas Door Cover Trim
- MI13527: 6-piece Body Molding Insert Trim Kit
- PP13527: 4-piece Pillar Post Trim
- PP13528: 6-piece Pillar Post Trim
- PP13529: 8-piece Pillar Post Trim
- RD13527: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP13527 License Plate Bezel
Which Pathfinder years does LP13527 fit?
2013 through 2020, 4-door SUV.
Are there trim exclusions?
None are listed.
Are dimensions listed?
No. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
