Product Description
Nissan Pathfinder 2013-2020 Stainless Steel Fuel Door Trim (GC13527)
This is a simple way to put a polished detail on a Nissan Pathfinder. GC13527 is a single stainless overlay for the gas door of the 4-door SUV, covering model years 2013 through 2020. It's made in the USA from 26 gauge 304 stainless steel with a polished finish.
Read first: it needs your gas door
GC13527 is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. The trim bonds to the outer face of that door; it doesn't replace the door, the hinge, or the cap.
Eight model years, one row
Nissan Pathfinder, 2013-2020, 4-door SUV. The Fitment tab shows the row. That's a long span for one part, so if you're shopping for a used Pathfinder in that range, the same listing applies to any of those years.
Attachment
it mounts with 3M automotive-grade acrylic foam tape. The piece installs directly over the existing surface, so there are no holes to drill. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Matching Pathfinder trim
This sheet has a short, clear list of Pathfinder parts:
- MI13527: a six-piece body molding insert kit, 0.75 inches.
- PP13527: four-piece pillar post trim.
- PP13528: six-piece pillar post trim.
- PP13529: eight-piece pillar post trim, including the rear triangle piece.
- RD13527: a one-piece rear accent, 1.25 inches, listed under the rear deck accent type.
- LP13527: a license plate bezel.
QAA doesn't say what the six-piece pillar set covers beyond the four-piece, so look at the photos. The eight-piece note is clearer about the rear triangle.
Good order of work
If you're doing several pieces, the gas door is a smart one to start with. It's flat, small, and quick, and it lets you see how the polished stainless sits next to your paint color before you take on the larger pillar or molding kits.
Prep and placement
Wash the door face and the area around it. Rinse and wipe with degreaser to strip wax, then let it dry. With the door closed, test-fit the trim and look for even margins on every side. Mark one corner on the body with painter's tape.
Press and check
Remove the liner, line up, and press firmly over the entire surface. Press again after a minute. Open the door slowly and close it to be sure nothing catches. See the Installation tab for the full steps.
Conditions and care
Choose a dry day with mild temperatures and keep the area dry overnight. Afterward, mild soap, water and a soft cloth keep it clean. Wipe off any fuel that drips during a fill-up.
Order checklist
Before ordering, confirm three things. It's a Pathfinder 4-door SUV. The model year falls between 2013 and 2020. The gas door is on the vehicle and closes flush. If any of those is uncertain, a quick call settles it.
Contact
For the Pathfinder gas door trim GC13527, call Quality Automotive Trims at 877-752-3811. The Pathfinder fuel door trim carries a UPC, shown in Specs.
GC13527 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC13527 |
| UPC | 691821475537 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2020 Nissan Pathfinder |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC13527
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Pathfinder | 2013-2020 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2020 Nissan Pathfinder
- LP13527: 1-piece License Plate Bezel
- MI13527: 6-piece Body Molding Insert Trim Kit
- PP13527: 4-piece Pillar Post Trim
- PP13528: 6-piece Pillar Post Trim
- PP13529: 8-piece Pillar Post Trim
- RD13527: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC13527 Gas Door Cover Trim
Does GC13527 replace the fuel door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
What years of Pathfinder fit?
The 2013-2020 Nissan Pathfinder 4-door SUV.
What is it made of?
26 gauge polished 304 stainless steel, made in the USA.
Will I need to drill?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape last?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
