Product Description
Nissan Rogue 2014-2020 License Plate Bezel, Stainless, Not for the Rogue Sport (LP14535)
Start with the one restriction that matters on this listing: the fitment row for LP14535 covers the Nissan Rogue 4-door SUV from 2014 through 2020 and carries the tag Does not fit Sport. If you drive a Rogue Sport, this bezel is not cataloged for it, and neither is any of the Rogue trim cross-listed on this sheet, since every sibling row carries the same exclusion. If you are unsure which one you own, your records will tell you, and Quality Automotive Trims can confirm at 877-752-3811.
The part
For the standard Rogue, LP14535 is a single License Plate Bezel that frames the plate area. It's cut from 26-gauge 304 stainless steel, polished to a mirror finish, and made in the USA. The listing doesn't give dimensions or call out cutouts, so treat the product photos as the reference and compare the outline with your own plate area, including the lock, emblem and lights nearby.
Attaching it
The bezel mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so nothing is drilled. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. To give the tape the best chance, take the plate off, wash and dry the area, and finish with a rubbing alcohol wipe. Hold the bezel in place with the liner still on to check the margins from behind the SUV, then use painter's tape as a guide. Peel the liner, line the frame up with your marks and press hard around the full outline. Work in the temperature range shown on the Installation tab.
Bezel versus bar
LB14535 is also listed for this Rogue: a one-piece License Bar, Above plate accent Trim. The bar is an accent above the plate, while this part frames the plate area. You can fit either one or both; if you want both, study the two sets of photos together, because the catalog gives no measurements for either.
More for the same SUV
The sheet lists a one-piece gas door cover trim, GC14535, and a one-piece rear bumper trim accent, RB14535. MI14535 is a four-piece body molding insert kit. Pillar post kits come in three sizes: PP14535 with four pieces, PP14536 with six and PP14537 with eight. RD14535, RW14535 and DH14536 are cross-listed by number only. Check each listing for its finish.
Why the bezel first
It is one piece in a single place, which makes it the quickest job on the list. Living with it for a few days shows you how polished stainless reads against your paint color before you commit to pillars or molding inserts.
Quick checks
Your Rogue should be a 2014 to 2020 model. If you keep a frame on the plate, refit it during the dry fit to make sure it doesn't sit over the bezel. Wash the stainless with mild soap and water and leave abrasive pads in the garage.
LP14535 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP14535 |
| UPC | 691821514045 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Nissan Rogue |
Fitment: LP14535
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Rogue | 2014-2020 | 4-door, SUV, Does not fit Sport |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Nissan Rogue
- GC14535: 1-piece Gas Door Cover Trim
- LB14535: 1-piece License Bar, Above plate accent Trim
- MI14535: 4-piece Body Molding Insert Trim Kit
- PP14535: 4-piece Pillar Post Trim
- PP14536: 6-piece Pillar Post Trim
- PP14537: 8-piece Pillar Post Trim
- RB14535: 1-piece Rear Bumper Trim Accent
- RD14535: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP14535 License Plate Bezel
Does LP14535 fit the Nissan Rogue Sport?
No. The fitment row says Does not fit Sport.
Which Rogue years are covered?
2014 through 2020, 4-door SUV.
How is it installed?
With 3M automotive-grade acrylic foam tape directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is it the same as LB14535?
No. LB14535 is a License Bar above the plate; LP14535 is the bezel around the plate area.
Are dimensions available?
Not on the listing. Use the photos or call 877-752-3811.
