Product Description
Nissan Rogue 2014-2020 Rear Bumper Accent, Not for the Rogue Sport (RB14535)
The single most important line on this page is the exclusion: RB14535 is listed for the 4-door Nissan Rogue SUV from 2014 through 2020, and the fitment record says it does not fit the Rogue Sport. The part itself is a one-piece rear bumper accent in mirror-polished 304 stainless steel, made in the USA, mounting with 3M tape.
Rogue versus Rogue Sport
The two names are close enough that buyers mix them up. The catalog is clear that this accent is for the Rogue and not the Rogue Sport. The same exclusion appears on every other Rogue kit linked here, so if you own the Sport, none of these listings are recorded for your vehicle. Call before ordering if you have any doubt about which one is in your driveway.
Model years
2014, 2015, 2016, 2017, 2018, 2019, and 2020, all on a single record.
Matching pieces for the back of the Rogue
- LB14535, a license bar above the plate
- LP14535, a license plate bezel
- RD14535, a rear deck accent
- RW14535, a two-piece rear window trim set
- GC14535, a gas door cover
Further forward are PP14535, PP14536, and PP14537 pillar kits, MI14535 body molding inserts, and DH14536 door handle covers.
What a rear bumper accent is
It is a polished strip that adheres to the rear bumper cover as a bright horizontal detail. The bumper is not modified.
Material
26-gauge 304 stainless steel, mirror polished. The finish is in the steel, so no plating can flake off.
Mounting
The Rogue bumper accent is pressed onto the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without harming the Nissan.
SUV prep
The back of a crossover gathers dust and road film every time the hatch closes. Wash the bumper, dry it fully, and wipe the mounting area with a residue-free cleaner. If you use a plastic protectant on the bumper, remove it from the spot where the tape will sit. Repair any chips first.
Install
On a dry, mild day, dry-fit the accent with its liner on, using the product photos as a guide. Measure from each end to the bumper edges, adjust until they match, and mark the position with masking tape. Peel the liner and press firmly from the middle toward each end. Hold off on washing for a few days. The Installation tab covers each step.
Care
Mild soap, a rinse, and a soft towel. Rinse off grit before wiping. No abrasive pads.
Centering tips
One strip on a wide bumper shows any offset at a glance. Take measurements from both ends during the dry-fit and look again from eye level behind the SUV before you peel. If you are fitting the license bar or bezel too, install those first and center the bumper accent against them.
Part details
SKU RB14535, UPC 691821512850. Quality Automotive Trims can confirm Rogue versus Rogue Sport fitment at 877-752-3811. Have your registration handy when you call.
RB14535 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB14535 |
| UPC | 691821512850 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Nissan Rogue |
Fitment: RB14535
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Rogue | 2014-2020 | 4-door, SUV, Does not fit Sport |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Nissan Rogue
- GC14535: 1-piece Gas Door Cover Trim
- LB14535: 1-piece License Bar, Above plate accent Trim
- LP14535: 1-piece License Plate Bezel
- MI14535: 4-piece Body Molding Insert Trim Kit
- PP14535: 4-piece Pillar Post Trim
- PP14536: 6-piece Pillar Post Trim
- PP14537: 8-piece Pillar Post Trim
- RD14535: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB14535 Rear Bumper Trim Accent
Does RB14535 fit the Nissan Rogue Sport?
No. The fitment record says it does not fit the Rogue Sport.
Which Rogue does it fit?
The 4-door Nissan Rogue SUV, 2014 through 2020.
How many pieces?
One.
What rear trim pairs with it?
LB14535 license bar, LP14535 license plate bezel, RD14535 rear deck accent, and RW14535 rear window trim.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
