Product Description
Nissan Rogue 2014-2020 Stainless License Bar, Not for the Rogue Sport (LB14535)
The most important line on this listing is an exclusion. LB14535 fits the Nissan Rogue 4-door SUV from 2014 through 2020, and the fitment row says plainly: Does not fit Sport. If your vehicle is badged Rogue Sport, this bar is not for it. Every other part QAA cross-lists for this Rogue carries the same note, so the warning applies across the whole group.
Confirming your vehicle
Your records show the model name and year. Check both against the listing: the name should read Rogue, without Sport, and the year should fall between 2014 and 2020. That is seven model years under one part number. If you are not sure which you have, call Quality Automotive Trims at 877-752-3811, mention LB14535, and we'll sort it out with you before anything ships.
What you get
A single license bar, cataloged as License Bar, Above plate accent Trim. It is 26-gauge 304 stainless steel, polished to a mirror finish, made in the USA. The mount is 3M automotive-grade acrylic foam tape, and it installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
The catalog doesn't give a width, and it doesn't mention a key, camera or emblem cutout. The photos show the bar's shape and its position above the plate; compare them to your own liftgate before ordering.
Fitting it straight
A bar above a plate reads as crooked the moment one end sits higher, so take your time with the dry fit. Clean the area with soap and water, then rubbing alcohol, and let it dry. Hold the bar in place, liner on, and look from several steps back. A strip of painter's tape run level just under where the bar's bottom edge will sit gives you a straight line to work from. Peel, set the bar on the line, and press firmly end to end. Remove the guide and press again. The Installation tab has temperature notes.
Related parts for this Rogue
Ten other parts are listed, all tagged Does not fit Sport. GC14535 is a one-piece gas door cover trim and LP14535 a one-piece license plate bezel. MI14535 is a four-piece body molding insert trim kit. PP14535, PP14536 and PP14537 are pillar post kits of four, six and eight pieces. RB14535 is a one-piece rear bumper trim accent. RD14535, RW14535 and DH14536 are cross-listed by number only on this sheet, so open those listings for their details. Check each listing's photos for its finish.
Why the Sport exclusion matters
The catalog doesn't explain what differs on the Rogue Sport, and we won't guess. What it does say is that this part, and every related part on the sheet, is not listed for it. Ordering by name, not by how the vehicle looks, is the simplest way to avoid a mismatch. If your paperwork is unclear, a photo of the badge on your liftgate taken before you call helps us check quickly.
Upkeep is mild soap and water; skip abrasive pads.
LB14535 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB14535 |
| UPC | 691821547265 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Nissan Rogue |
Fitment: LB14535
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Rogue | 2014-2020 | 4-door, SUV, Does not fit Sport |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Nissan Rogue
- GC14535: 1-piece Gas Door Cover Trim
- LP14535: 1-piece License Plate Bezel
- MI14535: 4-piece Body Molding Insert Trim Kit
- PP14535: 4-piece Pillar Post Trim
- PP14536: 6-piece Pillar Post Trim
- PP14537: 8-piece Pillar Post Trim
- RB14535: 1-piece Rear Bumper Trim Accent
- RD14535: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB14535 License Bar, Above plate accent Trim
Will LB14535 fit a Rogue Sport?
No. The fitment row says Does not fit Sport.
Which years are covered?
2014 through 2020, Nissan Rogue 4-door SUV.
How wide is it?
No width is listed. Use the photos or call 877-752-3811.
Does it need drilling?
No. 3M automotive-grade acrylic foam tape holds it directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
