Product Description
PP14536: Six Stainless Pillar Covers for the 2014-2020 Nissan Rogue (Not Sport)
PP14536 is the six-piece pillar post set for the Nissan Rogue, 2014-2020. It's polished 26 gauge 304 stainless steel made in the USA, and the fitment row carries three tags worth reading together: 4-door, SUV and "Does not fit Sport."
The Sport exclusion. The title says 2014-2020 Nissan Rogue and stops there, but the row rules out the Sport. Six covers for a Rogue built anywhere from 2014 to 2020. A plain Rogue in those years is on the row; a Rogue Sport isn't, and you should call 877-752-3811 with PP14536 instead of ordering. Every Rogue part on this sheet carries the same exclusion.
Where six fits in. The other two Rogue pillar sets are PP14535 (four pieces) and PP14537 (eight pieces). None of the listings has a note, none says which pillars it covers, and none mentions a triangle or mirror piece. Open the three galleries and compare the outlines; some shapes may appear in only one or two of them. Choose the one set that covers what you want; check the photos before you order.
Rogue companions. The sheet describes five more parts for the same non-Sport row. There's a one-piece gas door cover trim (GC14535), a one-piece license bar called "Above plate accent Trim" (LB14535), a one-piece license plate bezel (LP14535), a four-piece body molding insert trim kit (MI14535), and a one-piece rear bumper trim accent (RB14535). Three more, RD14535, RW14535 and DH14536, appear by number only. Look up each listing for its finish.
Mounting. The covers attach with 3M automotive-grade acrylic foam tape directly over the existing surface: no drilling, no trim removed. The listing doesn't state how long the tape holds.
The metal. 304 stainless, polished, so the shine is the steel and there's no coating to lift. The 26 gauge sheet keeps each cover thin.
Prep routine. Wash the pillars by hand with plain car shampoo, rinse until the water runs clear, and dry with microfiber. Wipe each pillar with rubbing alcohol on a lint-free cloth and give it time to evaporate. If there's wax or a ceramic coating on them, remove it where the tape will go.
Fitting six. Sort the Rogue covers using the gallery images. With every liner attached, hold each to its pillar and check that the long edges track the post evenly. Mark the top and bottom with painter's tape and write the position on the liner. Map every cover in order. Then peel one liner, lower the cover into its marks, and rub it down firmly along its length and both edges before moving to the next. Stand back after every two covers. Temperature range and cure time are on the Installation tab.
Conditions. A dry day out of direct sun, with a step stool for the upper ends.
Arrival. Compare six covers with the photos before starting. A cover that won't sit flush should stay on its liner while you try another pillar; if that fails, call Quality Automotive Trims. Clean later with car soap and microfiber.
PP14536 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP14536 |
| UPC | 691821264988 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Nissan Rogue |
Fitment: PP14536
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Rogue | 2014-2020 | 4-door, SUV, Does not fit Sport |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Nissan Rogue
- GC14535: 1-piece Gas Door Cover Trim
- LB14535: 1-piece License Bar, Above plate accent Trim
- LP14535: 1-piece License Plate Bezel
- MI14535: 4-piece Body Molding Insert Trim Kit
- PP14535: 4-piece Pillar Post Trim
- PP14537: 8-piece Pillar Post Trim
- RB14535: 1-piece Rear Bumper Trim Accent
- RD14535: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP14536 Pillar Post Trim
Does PP14536 fit the Rogue Sport?
No. The row is tagged "Does not fit Sport."
What does it fit?
The 2014-2020 Nissan Rogue, 4-door SUV, other than the Sport.
Will it overlap with PP14535 or PP14537?
It might. None of the three names its pillars, so compare photos and choose one.
Is drilling needed?
No. It uses 3M automotive-grade acrylic foam tape directly over the existing surface.
Does it include a triangle piece?
The listing has no notes and doesn't name one.
