Product Description
Nissan Rogue 2014-2020 Stainless Molding Insert Kit (MI14535)
MI14535 is a four-piece stainless steel molding insert kit for the Nissan Rogue, listed for 2014 through 2020. The single fitment row is tagged 4-door SUV, and it carries an important exclusion: "Does not fit Sport." If your Rogue is the Sport, this kit isn't listed for it.
The Sport exclusion runs through the whole sheet
Every part linked to this Rogue carries the same "Does not fit Sport" tag, from the gas door trim to the pillar posts. So if your Rogue is the Sport, none of the parts on this sheet are listed for your vehicle. If you're not sure which model you have, check the badging and your records, or call Quality Automotive Trims at 877-752-3811.
No width on file
The record doesn't give a width for these strips, and there's no note describing their size or layout. We've flagged the missing width. The product photos are the only guide to how wide the stainless line is and where each of the four pieces goes. If the width matters for your moldings, call before ordering.
Build and mounting
The strips are polished 304 stainless steel, 26 gauge, made in the USA. They mount with 3M automotive-grade acrylic foam tape and install directly over the existing surface, so nothing is drilled. Phone 877-752-3811 with MI14535 for questions about your Rogue.
Other Rogue parts
- GC14535: 1-piece Gas Door Cover Trim
- LB14535: 1-piece License Bar, Above plate accent Trim
- LP14535: 1-piece License Plate Bezel
- PP14535, PP14536, PP14537: Pillar Post Trim in 4, 6 and 8 pieces
- RB14535: 1-piece Rear Bumper Trim Accent
RD14535, RW14535 and DH14536 are listed as well. Each part has its own page for material and mounting.
Preparing the moldings
The inserts bond to the Rogue's existing moldings, so check them first. Look for cracks, peeling or loose sections and repair them. Wash with soap and water, dry thoroughly, and wipe with rubbing alcohol to remove wax.
Fitting the four strips
Match each piece to its position using the photos, and label the liners with painter's tape. Dry-fit one strip at a time with the liner on, aligning it with the molding edges, and mark its ends. Peel the liner, place the strip on the marks and press firmly along its whole length. After each piece, step back and check that the line runs straight.
The Installation tab has the full steps and the tape's temperature range. Choose a dry, mild day and keep the Rogue out of rain and the first wash until the bond settles.
A quick checklist
- A Rogue that is not the Sport
- Model year 2014 to 2020
- Moldings in good condition
- Width confirmed from the photos or by phone
Care
On the Rogue, mild soap, water and a soft cloth keep the polished inserts bright; keep abrasive pads and steel wool away.
Year check
The row runs 2014 through 2020. These inserts are for the 2014-2020 Rogue. Need to check something on the Rogue inserts? We're at 877-752-3811.
Questions about MI14535? Call 877-752-3811.
MI14535 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI14535 |
| UPC | 691821487981 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Nissan Rogue |
Fitment: MI14535
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Rogue | 2014-2020 | 4-door, SUV, Does not fit Sport |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Nissan Rogue
- GC14535: 1-piece Gas Door Cover Trim
- LB14535: 1-piece License Bar, Above plate accent Trim
- LP14535: 1-piece License Plate Bezel
- PP14535: 4-piece Pillar Post Trim
- PP14536: 6-piece Pillar Post Trim
- PP14537: 8-piece Pillar Post Trim
- RB14535: 1-piece Rear Bumper Trim Accent
- RD14535: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI14535 Body Molding Insert Trim Kit
Which vehicle does MI14535 fit?
The Nissan Rogue 4-door SUV, 2014 through 2020. It does not fit the Sport.
How wide are the strips?
The record doesn't list a width. Check the photos or call 877-752-3811.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
How does it mount?
With 3M automotive-grade acrylic foam tape, directly over the existing surface, no drilling.
Do the other Rogue parts fit the Sport?
No. Every linked part carries the same Does not fit Sport tag.
