Product Description
2019-2023 Ford Ranger SuperCab Lower Side Accent, 8 Pieces of 2" Polished Stainless (AT59348)
The SuperCab is the Ranger with the smaller rear doors, and QAA cuts its lower door trim separately from the SuperCrew version. AT59348 is the body side molding accent for the 2019-2023 Ford Ranger Super Cab pickup. It is an eight-piece kit in polished stainless steel, and QAA's note puts it low on the body: it spans from the bottom of the door up to the specified width of 2". The effect is a solid band of bright steel along the bottom edge of the doors, a look that suits a midsize pickup.
Make sure you have the Super Cab
QAA catalogs this kit for the Ranger Super Cab, which it lists as a 4-door pickup. The other cab style, the Super Crew Cab, uses AT59345, the same eight-piece 2" lower accent cut for those doors. The two do not swap, because the door shapes differ. Check your records for the cab name, or call us if you are not sure.
A two-inch lower band
Because it starts at the bottom edge of the door and rises two inches, this accent frames the lower body rather than splitting the door in the middle. It reads as a clean, tough-looking detail on a truck. The product photos show where the eight pieces land and how the band follows each door.
Material and finish
Every piece is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. It is solid stainless, so the shine is in the metal rather than a coating. Grade 304 is a mainstream stainless for exterior trim, and 26 gauge is the thickness of the sheet QAA starts with.
How to install it
Each piece comes with 3M automotive-grade acrylic foam tape pre-applied and installs directly over the existing surface of the doors. No drilling is required, and nothing on the truck comes off. QAA states the tape will hold for a lifetime without causing any damage to the surface. The lower doors on a pickup pick up a lot of dirt, so wash, degrease, and dry that area carefully. Line up the bottom edge of each piece with the bottom of the door, then press firmly across its whole width. The Installation tab spells out the steps.
Matching Super Cab trim
For the same Super Cab, QAA lists PP59348, a two-piece pillar post trim, and WS59348, a two-piece window sill set for the face of the sills. Parts listed for the 4-door Ranger pickup in general include a four-piece front grille accent, where QAA notes the "A" and "R" pieces are very small, and a 1" tailgate accent. There are also emblem listings, a wheel well accent, and rocker kits for this Ranger. Check the cab on each before ordering. Everything is linked from the Fitment tab.
Model years
The kit is listed for 2019, 2020, 2021, 2022, and 2023. The Fitment tab shows the catalog row exactly as QAA has it.
Questions
Call Quality Automotive Trims at 877-752-3811 with your year and cab, and mention part number AT59348. The UPC is in the Specs tab.
AT59348 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT59348 |
| UPC | 691821740253 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2" |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2023 Ford Ranger |
Fitment: AT59348
| Vehicle | Years | Body style |
|---|---|---|
| Ford Ranger | 2019-2023 | 4-door, Pickup Truck, Super Cab |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2023 Ford Ranger
- PP59345: 4-piece Pillar Post Trim
- PP59346: 6-piece Pillar Post Trim
- PP59348: 2-piece Pillar Post Trim
- WS59345: 4-piece Window Sill Trim Set
- WS59348: 2-piece Window Sill Trim Set
- SG59345: 4-piece Front Grille Accent Trim
- RT59345: 1-piece Tailgate Accent Trim
- SGR59345: 6-piece Graphic/Logo/Emblem
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 8 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT59348 Body Side Molding Accent Trim
What Ranger does AT59348 fit?
The 2019 through 2023 Ford Ranger Super Cab pickup.
I have a SuperCrew. Which kit do I need?
AT59345 is the version for the Super Crew Cab.
Where does it sit on the door?
It spans from the bottom of the door up to 2".
How many pieces?
Eight pieces of polished 26-gauge 304 stainless steel, made in the USA.
How does it install?
With pre-applied 3M acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
Is there matching window trim for the Super Cab?
Yes. PP59348 is a two-piece pillar post trim and WS59348 is a two-piece window sill set, both for the Super Cab.
