Product Description
Hummer H2 Tail Light Ring Package, 14 Pieces, Polished Stainless, 2003-2009 (HV43016)
Fourteen rings for the tail lights of a Hummer H2: HV43016 is cataloged as a Tail Light Ring Package for the H2 4-door SUV, model years 2003 through 2009. The pieces are cut from 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA, and they mount with 3M automotive-grade acrylic foam tape.
Fourteen pieces, two lamps
The catalog gives the count and the name, "ring package," but it doesn't explain how the fourteen rings are split between the two tail lights or which ring goes on which part of the lamp. The product photos show the full set in place. Before you buy, compare those photos with the tail lights on your H2. If your lamps have been swapped for aftermarket units, the rings may not line up, so call us first.
Ring trim and lenses
Ring trim outlines a shape rather than covering it, so on a tail light the rings frame parts of the lamp. Take care during installation to keep adhesive and fingerprints off the lens surfaces, and make sure no piece covers the light output in a way you don't want. The photos are the reference for proper placement.
Mounting
Each ring has 3M automotive-grade acrylic foam tape and installs directly over the existing surface, with no drilling and no need to take the lamps apart. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Small rings are fiddly, so set yourself up well. Clean both tail lights with mild soap and water, then wipe the mounting areas with rubbing alcohol and let them dry. Lay the fourteen rings out on a towel, matching them to the photos. Sizes may differ, so pair each ring with its spot before you peel anything. Working one lamp at a time, peel a liner, set the ring, and press around its full circumference. Once all fourteen are on, go around each ring again with firm pressure. The Installation tab has notes on temperature. Each ring is polished stainless.
Rear-end companions
Several parts on the H2 sheet go on the back of the SUV. HV43001 is the eight-piece "HUMMER" rear bumper letter set with two accent pieces, and HV43012 is a three-piece rear bumper accent noted "Includes Cut Out for HUMMER logo." HV43005 is a one-piece license plate bezel, and HV43010 a one-piece tailgate accent. Check each listing for photos and fitment.
Fitment
One fitment row, Hummer H2 4-door SUV, 2003-2009, seven model years with no trim exclusions. Start by checking your model year against that range.
Upkeep
Rings near the lens collect dust at their edges. A soft brush and mild soapy water clean them without lifting the trim. Dry with a soft towel, and avoid abrasive products, which can scratch both the polished steel and the lens.
Questions about the H2 tail light ring layout? Phone Quality Automotive Trims at 877-752-3811 and give HV43016; Specs lists the UPC.
HV43016 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HV43016 |
| UPC | 691821720521 |
| Part type | Tail Light Ring Package |
| Pieces in kit | 14 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2003-2009 Hummer H2 |
Fitment: HV43016
| Vehicle | Years | Body style |
|---|---|---|
| Hummer H2 | 2003-2009 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2003-2009 Hummer H2
- HV43001: 8-piece Letter Insert Graphics
- HV43003: 2-piece Hood Handle Accent Trim
- HV43004: 8-piece Hood Latch Base Accent Trim
- HV43005: 1-piece License Plate Bezel
- HV43006: 10-piece Hood Accent Package
- HV43007: 5-piece Front Bumper Trim
- HV43008: 6-piece Front Bumper Trim
- HV43009: 7-piece Front Bumper Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tail Light Ring Package
- Unpack all 14 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HV43016 Tail Light Ring Package
What is HV43016?
A fourteen-piece polished stainless tail light ring package for the 2003-2009 Hummer H2 4-door SUV.
How are the rings divided between the lamps?
The catalog doesn't say. The product photos show the full layout.
Do I need to remove the tail lights?
The rings install directly over the existing surface with 3M automotive-grade acrylic foam tape, with no drilling.
How long will the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Will they fit aftermarket tail lights?
The listing is for the H2 as cataloged. If your lamps have been replaced, call 877-752-3811 first.
