Product Description
Chrysler Pacifica 2017-2021 Stainless Trunk Hatch Accent Trim TP57750, 1 Piece
TP57750 is a one-piece polished stainless steel Trunk Hatch Accent Trim for the 2017-2021 Chrysler Pacifica, listed in the fitment as a 4-door SUV. There's no width or placement note in the record, so the photos show where the piece goes.
Ordering by part number
The product title, the SKU and QAA's own listing all read TP57750, the one-piece hatch accent for the 2017-2021 Pacifica. When you order or call, use TP57750 and the UPC below, and ask us at 877-752-3811 if anything on the listing is unclear.
The linked license bar
The record links LB57750, a one-piece License Bar Extension Trim for the same vehicle. Its record gives nothing beyond that name and piece count. If you plan to fit both, look at their photos together to see how they relate on the hatch.
Construction
- Polished 26-gauge 304 stainless of high quality
- American-made
- Fits over the Pacifica's current trunk surface
- Attached using 3M automotive-grade acrylic foam tape
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Checking placement
Compare the photos with your Pacifica's hatch before ordering. When the box arrives, hold the piece up with its liner still on and confirm it follows the surface without gaps. If it doesn't, stop and call us.
Preparation
Wash the hatch, rinse it, and allow it to dry completely. Clean the bonding area with a wax-and-grease remover, then wipe it with isopropyl alcohol just before fitting. Keep fingers off the cleaned surface.
Dry fit and marking
Hold the trim in place and look at it from a few paces back. Mark both ends with painter's tape once it sits level. Open and close the hatch to check that nothing catches.
Bonding
- Start by peeling a short piece of liner at one end of the accent.
- Place that end on its mark.
- Keep peeling and pressing your way along.
- Press firmly over the whole Pacifica accent to finish.
Conditions
Fit on a mild, dry day out of direct sun. Leave the hatch unwashed for a day.
Care
Mild soap, water and a soft cloth. A non-abrasive stainless cleaner takes care of fingerprints; skip scouring pads.
Tools and time
Painter's tape, lint-free cloths, wax-and-grease remover and isopropyl alcohol. A helper can hold the far end and judge the level. Allow about half an hour.
What to have ready if you call
Your model year, a photo of the hatch, and the SKU TP57750. With those, we can check the listing against your hatch in one call.
Before ordering
Confirm a Pacifica from 2017 to 2021 with a hatch matching the photos. If the hatch has been repaired or anything looks different, call first. Check the piece on arrival, store it flat until fitting day, and press down any raised edge the next morning.
A second look at the edges the next day is worth the minute it takes, so any spot that has lifted can be pressed down.
Pacifica owners with questions can call Quality Automotive Trims, 877-752-3811. SKU TP57750, UPC 840251600228.
TP57750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TP57750 |
| UPC | 840251600228 |
| Part type | Trunk Hatch Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2021 Chrysler Pacifica |
Fitment: TP57750
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2017-2021 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2021 Chrysler Pacifica
- LB57750: 1-piece License Bar Extension Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Trunk Hatch Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TP57750 Trunk Hatch Accent Trim
Which vehicle does TP57750 fit?
The 2017-2021 Chrysler Pacifica, listed as a 4-door SUV.
Does QAA list this accent under the same number?
Yes. QAA's product page names it TP57750, as our title does. Call 877-752-3811 with any question.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
How many pieces?
One.
