Product Description
Chrysler Pacifica 2017-2021 License Bar Extension Trim, One Piece (LB57750)
LB57750 is cataloged as License Bar Extension Trim, and it comes as a single piece. It fits the Chrysler Pacifica 4-door, which the catalog tags as an SUV, model years 2017 through 2021. It is polished 304 stainless steel, 26-gauge, made in the USA.
One piece called an extension
The catalog doesn't explain what "extension" means for this part, where exactly it sits, or how wide it is. We won't fill in those blanks. The product photos show its shape and position, and they're your guide. Look at them next to the back of your Pacifica. If the layout isn't clear, or something on your liftgate differs from the photos, call Quality Automotive Trims at 877-752-3811 with LB57750 before ordering.
How it attaches
On the Pacifica, 3M automotive-grade acrylic foam tape holds the bar over the existing surface, with no holes and no hardware. According to QAA, the tape will hold for a lifetime and won't harm the Pacifica's surface.
Fitment
One row: Chrysler Pacifica, 2017 to 2021, five model years, 4-door, tagged SUV in the catalog. The row doesn't list any trim exclusions or engine conditions, so the part is listed across the whole range. If your paperwork shows a year outside it, this isn't the listing for you. Check the Pacifica's model year against the listed range before ordering.
One companion part
The only other part cross-listed for this Pacifica is TP57750, a one-piece trunk hatch accent trim. Both parts go on the back of the Pacifica. The catalog doesn't describe how they sit relative to each other, so compare both listings' photos side by side if you're considering the pair, and check each for its finish.
Getting it on straight
On a wide liftgate, a single accent needs to be centered carefully. Clean the area with soap and water, dry, and wipe twice with rubbing alcohol. Hold the part in place, liner on, using the photos as the reference. Measure from each end to a fixed feature, such as the plate's edges, so the two gaps match. Check level from a few steps back; a helper can call out adjustments. Mark the ends with painter's tape, peel the liner, align, and press firmly along the length. Remove the marks and press again. Close the liftgate gently for the first day. The Installation tab gives the temperature range.
Paint check
Look over the area in good light. Chips, lifting clear coat, or residue from a dealer badge will weaken the bond. Remove residue carefully and fix any flaking paint before installing.
A good first piece
If you're considering polished stainless for the Pacifica but aren't sure, a single accent at the back is an easy way to try the look. Hold it in place, liner on, in daylight, and decide before you peel anything. If you like it, TP57750 is the other part on this sheet to consider.
Care
Wash with mild soap and water and dry with a soft towel. Avoid abrasive pads and gritty compounds.
LB57750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB57750 |
| UPC | 840251600204 |
| Part type | License Bar Extension Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2021 Chrysler Pacifica |
Fitment: LB57750
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2017-2021 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2021 Chrysler Pacifica
- TP57750: 1-piece Trunk Hatch Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar Extension Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB57750 License Bar Extension Trim
How many pieces is LB57750?
One.
Which Pacifica years does it fit?
2017 through 2021.
Where does it go?
The catalog doesn't say. The photos show the position; call 877-752-3811 with questions.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is a width listed?
No.
