Product Description
Chrysler Pacifica 2004-2008 Polished Stainless License Plate Bezel (LP44750)
LP44750 is a single stainless License Plate Bezel for the Chrysler Pacifica, tagged 4-door SUV, model years 2004 through 2008. Five years, one row, no trim exclusions. It's cut from 26-gauge 304 stainless steel, mirror polished and made in the USA, and it frames the plate area.
Two parts cataloged for the rear
Besides this bezel, the Pacifica sheet lists DH44750, a one-piece Tailgate Handle Accent Trim Ring. Both are cataloged for the back of the vehicle, and if you're planning both, look at their photos together. The catalog doesn't give dimensions for either, so it won't tell you how close they sit; the photos and your own vehicle will. Questions are best handled by phone: Quality Automotive Trims, 877-752-3811, quoting LP44750 and DH44750.
Outline
No cutout notes appear for the bezel. Compare its outline in the photos with the area around your plate, especially any lock, handle, emblem or lighting.
Mounting
The bezel uses 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Since these SUVs date from 2004 to 2008, repair chips and lifting clear coat around the plate before starting, and remove old adhesive. Wash, dry and wipe with rubbing alcohol. Dry-fit with the liner on, mark with painter's tape, then peel and press. The Installation tab covers the full sequence and temperature range.
Pillar kits, numbered out of order
Three pillar post kits are listed, and their numbers don't follow their piece counts: PP44750 has four pieces, PP44751 has eight, and PP44752 has six. Read the piece count on each listing rather than assuming from the number. We've noted the ordering for review.
Front and lower body
FV44750 is a two-piece Front Vent Trim. TH44750 is an eight-piece Rocker Panel Trim, Upper Kit listed from 4.75" to 6" that Spans from the bottom of the molding DOWN to the specified width. GC44750 is a one-piece gas door cover trim. TH44751, TH44752, WP44750 and WP44751 are cross-listed by number only. Check each listing for its finish.
Where to begin
With an eight-piece rocker kit and three pillar options on the list, the one-piece bezel is the simplest starting point, and seeing it on the car helps you decide how far to go. The handle ring has its own listing that explains how it mounts; hold it and the bezel up to the Pacifica together before committing either. That way you can see them as a pair at the rear before anything is permanent. Pacifica fit questions go to 877-752-3811.
Before you order
It's listed for 2004 through 2008 Pacificas, so check yours is one of them. If you use a plate frame, refit it during the dry fit to make sure it doesn't overlap the bezel. Clean the stainless with mild soap and water and a soft towel, and keep abrasive pads away from the mirror finish.
LP44750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP44750 |
| UPC | 641606029875 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Chrysler Pacifica |
Fitment: LP44750
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2004-2008 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Chrysler Pacifica
- DH44750: 1-piece Tailgate Handle Accent Trim Ring
- FV44750: 2-piece Front Vent Trim
- GC44750: 1-piece Gas Door Cover Trim
- PP44750: 4-piece Pillar Post Trim
- PP44751: 8-piece Pillar Post Trim
- PP44752: 6-piece Pillar Post Trim
- TH44750: 8-piece Rocker Panel Trim, Upper Kit
- TH44751: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP44750 License Plate Bezel
Which Pacifica does LP44750 fit?
The 2004-2008 Chrysler Pacifica 4-door SUV.
Which pillar kit has six pieces?
PP44752. PP44750 has four and PP44751 has eight.
How does the bezel attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
How many pieces?
One.
