Product Description
Chrysler Pacifica Polished Stainless Tailgate Handle Trim Ring, 2004-2008 (DH44750)
DH44750 is a single stainless trim ring for the liftgate handle on the 2004-2008 Chrysler Pacifica, which QAA catalogs as a 4-door SUV. It is made in the USA from polished 26-gauge 304 stainless steel and installs over the existing surface around the rear handle. It also belongs to one of the larger Pacifica trim families in the catalog.
Pacifica parts in the same family
QAA cross-lists these parts for the same SUV:
- FV44750, a 2pc front vent trim set
- GC44750, a 1pc gas door cover trim
- LP44750, a 1pc license plate bezel
- PP44750, PP44751, and PP44752, pillar post trim sets in 4pc, 8pc, and 6pc versions
- TH44750, an 8pc upper rocker panel kit at 4.75-6 inches, spanning from the bottom of the molding down to the specified width
Four more parts are linked by number only. The license plate bezel is the natural partner here, since together with the handle ring it dresses up the rear of the SUV. The catalog data does not explain how the three pillar post sets differ beyond piece count, so compare their photos or call us.
Fitment
The fitment row reads Chrysler Pacifica, 4-door SUV, 2004 through 2008, and the Fitment tab shows it as QAA records it.
One ring
The package is one piece. Its exact outline and size are not given in the catalog, so the product photos are the best way to see how it frames the handle.
Material
Type 304 stainless steel, a widely used grade, rolled to 26 gauge and polished to a bright, mirror-like finish. The thin sheet lets the ring sit flush around the handle. Made in the USA.
Install
The ring mounts with 3M automotive-grade acrylic foam tape and goes directly over the existing surface, no drilling required. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
- Clean the area surrounding the rear handle and rinse it.
- Clear wax and road film with degreaser.
- Dry completely.
- Center the ring over the handle with the liner still on.
- Peel the liner and press firmly around the whole piece.
Hold off on washing and avoid slamming the liftgate for a while. The Installation tab gives the full process.
Why the rear handle
The rear handle is opened far more often than people realize, and the finish around it shows that wear. A polished ring frames it cleanly while the handle keeps working as before.
Getting the ring centered
With a single ring, alignment is everything. Hold it in place with the liner on and look at it from straight behind the Pacifica and from a step to each corner. A light pencil mark or a strip of painter's tape on the paint can help you return to the same spot after you peel the liner. Remove the tape guide once the ring is pressed down.
Upkeep
Wash and dry with the rest of the vehicle using a soft towel, and avoid abrasive pads that could dull the polish.
Questions
For a Pacifica question about DH44750, the number to call is 877-752-3811. Its UPC appears under Specs.
DH44750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH44750 |
| UPC | 691821745319 |
| Part type | Tailgate Handle Accent Trim Ring |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Chrysler Pacifica |
Fitment: DH44750
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2004-2008 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Chrysler Pacifica
- FV44750: 2-piece Front Vent Trim
- GC44750: 1-piece Gas Door Cover Trim
- LP44750: 1-piece License Plate Bezel
- PP44750: 4-piece Pillar Post Trim
- PP44751: 8-piece Pillar Post Trim
- PP44752: 6-piece Pillar Post Trim
- TH44750: 8-piece Rocker Panel Trim, Upper Kit
- TH44751: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tailgate Handle Accent Trim Ring
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH44750 Tailgate Handle Accent Trim Ring
Which vehicle does DH44750 fit?
The 2004-2008 Chrysler Pacifica 4-door SUV.
Is this for the doors?
No. It is a single tailgate handle accent trim ring for the rear handle.
Is there matching trim?
Yes. QAA cross-lists vent, gas door, license plate, pillar post, and rocker trim for the Pacifica.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
