Product Description
Chrysler Pacifica 2004-2008 Stainless Gas Door Trim (GC44750)
GC44750 is listed for the 2004-2008 Chrysler Pacifica 4-door SUV and covers the fuel door with one polished piece of 304 stainless steel. The sheet is 26 gauge, it's made in the USA, and it mounts with 3M automotive-grade acrylic foam tape. Five model years share the single Fitment row.
Important: it is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. The trim covers the face of your Pacifica's door and can't take the place of a damaged or missing one.
Pacifica parts on the same sheet
There's a good spread of cross-listed trim for this SUV, so the gas door accent can be one piece of a larger plan. DH44750 is a one-piece tailgate handle accent ring and FV44750 a two-piece front vent trim. LP44750 is a one-piece license plate bezel. Three pillar post sets are listed: PP44750 with four pieces, PP44752 with six and PP44751 with eight. The catalog doesn't describe what the additional pieces cover in the larger sets, so compare the photos on each listing or call to choose. TH44750 is an eight-piece upper rocker kit at 4.75-6 inches, spanning from the bottom of the molding down to the specified width. Four more, TH44751, TH44752, WP44750 and WP44751, are referenced by number, with no details here.
A tip if you're planning several: the gas door trim and the tailgate handle ring are both single pieces, so they're the quickest to fit and a low-commitment way to see how the polished finish looks on your paint color before moving on to pillars or rockers.
Before you order, double-check three things: the vehicle is a Pacifica, its model year is 2004 through 2008, and the gas door is present and undamaged.
Attachment
GC44750 installs directly over the existing surface. Nothing is drilled. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The paint is what the tape holds onto, so inspect it: fading, flaking clear coat, chips at the edge, or bubbles should all be repaired first. Also make sure the door closes flush.
Installing
Wash and dry the door, then degrease its face until a clean cloth picks up nothing. With the liner on, place the trim against the closed door and move it until the even line of paint shows all the way around. Mark the position with painter's tape. Peel the liner, line up, and press firmly across the whole face. Press again a minute later. Open the door slowly to check for clearance. Full steps are on the Installation tab.
Finish and care
The polished 304 stainless is bright and reflective, and 26 gauge keeps it thin against the door. Install on a mild, dry day and let it cure overnight before it gets wet. Afterward, wash gently with mild soap and a soft cloth, and wipe away fuel drips.
Questions about the Pacifica parts? Ring Quality Automotive Trims at 877-752-3811, give GC44750, and see Specs for the UPC.
GC44750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC44750 |
| UPC | 691821710942 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Chrysler Pacifica |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC44750
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2004-2008 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Chrysler Pacifica
- DH44750: 1-piece Tailgate Handle Accent Trim Ring
- FV44750: 2-piece Front Vent Trim
- LP44750: 1-piece License Plate Bezel
- PP44750: 4-piece Pillar Post Trim
- PP44751: 8-piece Pillar Post Trim
- PP44752: 6-piece Pillar Post Trim
- TH44750: 8-piece Rocker Panel Trim, Upper Kit
- TH44751: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC44750 Gas Door Cover Trim
Is GC44750 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Which Pacifica years fit?
The 2004-2008 Chrysler Pacifica 4-door SUV.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it require drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Which pillar post set should I choose?
PP44750 has four pieces, PP44752 six and PP44751 eight. QAA doesn't describe the additional pieces, so compare photos or call 877-752-3811.
