Product Description
2004-2008 Chrysler Pacifica Lower Rocker Trim, Tapered 6.625"-7.5", 8 Pieces (TH44751)
TH44751 is the Pacifica's Lower Kit: eight polished stainless steel pieces for the 2004-2008 Chrysler Pacifica four-door SUV, tapered from 6.625" to 7.5". They start at the bottom of each door and rise, per "Spans from the bottom of the door UP to the specified width."
From the bottom up, and tall
At up to seven and a half inches, this is the tallest of the Pacifica side options on the sheet. The Upper Kit, TH44750, hangs from the molding at 4.75" to 6"; the Insert Kit, TH44752, covers the molding itself with twelve pieces. The data doesn't say which can be combined. Measure from the door bottom to the molding at the front and rear of each door before ordering, and call 877-752-3811 if any reading is near the kit's width.
Taper direction
The record doesn't say which end of the taper is taller. The product photos show the shape; check orientation during the dry-fit.
Linked Pacifica trim
- Pacifica pillar posts: PP44750 (four), PP44752 (six), PP44751 (eight).
- Window packages: WP44750 (fourteen pieces, upper trim and pillar posts) and WP44751 (six pieces, upper trim only).
- FV44750 front vents, DH44750 tailgate handle ring, GC44750 gas door cover, LP44750 plate bezel.
Read each listing for its own details.
Material
The eight tapered Pacifica strips are cut in the USA from polished 26 gauge 304 stainless and rise from the door bottom on 3M automotive-grade acrylic foam tape. QAA states it will hold for a lifetime with no harm to the 2004-2008 SUV.
Surface check
A tall band covers much of each lower door. Look in raking light for dents and chips and repair them first.
Cleaning
Wash, rinse and dry. Wipe the band with isopropyl alcohol.
Install
- Sort the pieces with the photos; label the liners.
- Painter's-tape the Pacifica pieces up.
- Peel a few inches of liner, set the bottom edge on the door bottom, press along.
- Press each one firmly.
After
Open every door; check clearance; wait a day to wash.
Keeping the Pacifica line
The Pacifica door gaps are fixed points for consistent placement.
A helper
Tall pieces are easier with someone holding the far end off the paint.
Before ordering
Check the year, measure the door-bottom-to-molding distance at a few points on each door, and look at a painter's tape mock-up seven and a half inches tall from across the driveway. If the look and the measurements both work, this is the record. If not, send a side photo to 877-752-3811.
Door bottoms
Each piece's lower edge follows the bottom of the door, so repair bubbling or chips along those edges first.
Conditions and care
Install in dry, mild weather or indoors. Afterward, wash with mild soap and a soft mitt and dry the steel.
Supplies
Painter's tape, tape measure, isopropyl alcohol, a marker and microfiber cloths.
What to send
Year, a photo of the whole Pacifica, and your door-bottom-to-molding measurements.
Matching the look
Once every piece is on, stand at each corner of the SUV and compare the top edges. If anything looks uneven, call us before you try to lift anything.
TH44751, UPC 691821273546: questions to 877-752-3811.
TH44751 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44751 |
| UPC | 691821273546 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.625" to 7.5" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Chrysler Pacifica |
Fitment: TH44751
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2004-2008 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Chrysler Pacifica
- DH44750: 1-piece Tailgate Handle Accent Trim Ring
- FV44750: 2-piece Front Vent Trim
- GC44750: 1-piece Gas Door Cover Trim
- LP44750: 1-piece License Plate Bezel
- PP44750: 4-piece Pillar Post Trim
- PP44751: 8-piece Pillar Post Trim
- PP44752: 6-piece Pillar Post Trim
- TH44750: 8-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44751 Rocker Panel Trim, Lower Kit
What does TH44751 fit?
The Chrysler Pacifica four-door SUV, 2004-2008.
How wide is it?
Tapered, 6.625" to 7.5", up from the bottom of the door.
Can I use it with the Upper Kit?
The data doesn't say. Call 877-752-3811.
How many pieces?
Eight.
